Nanomechanical Instruments for SEM/TEM

• Acta Mater. 185, 309–319 (2020).Size-dependent quasi Brittle–Ductile transition of single crystalline alpha-alumina particles during microcompression.
• Afshar-Mohajer, M. & Zou, M. Multi-Scale In Situ Tribological Studies of Surfaces with 3D Textures Fabricated via Two-Photon Lithography and Replica Molding. Adv. Mater. Interfaces 7, 2000299 (2020).
• Ajantiwalay, T., Vo, H., Finkelstein, R., Hosemann, P. & Aitkaliyeva, A. Towards Bridging the Experimental Length-Scale Gap for Tensile Tests on Structural Materials: Lessons Learned from an Initial Assessment of Microtensile Tests and the Path Forward. JOM 72, 113–122 (2020).
• Alfreider, M., Issa, I., Renk, O. & Kiener, D. Probing defect relaxation in ultra-fine grained Ta using micromechanical spectroscopy. 
• Cao, K. et al. Elastic straining of free-standing monolayer graphene. Nat. Commun. 11, 284 (2020).
• Cao, Z. H. et al. Strong and plastic metallic composites with nanolayered architectures. Acta Mater. 195, 240–251 (2020).
• Čapek, J. et al. ZnMg0.8Ca0.2 (wt%) biodegradable alloy – The influence of thermal treatment and extrusion on microstructural and mechanical characteristics. Mater. Charact. 162, 110230 (2020).
• Ding, R., Chiu, Y., Chu, M., Paddea, S. & Su, G. A study of fracture behaviour of gamma lamella using the notched TiAl micro-cantilever. Philos. Mag. 100, 982–997 (2020).
• Ding, R., Knaggs, C., Li, H., Li, Y. G. & Bowen, P. Characterization of plastic deformation induced by machining in a Ni-based superalloy. Mater. Sci. Eng. A 778, 139104 (2020).
• Fang, S. et al. Microstructures and mechanical properties of CoCrFeMnNiVx high entropy alloy films. J. Alloys Compd. 820, 153388 (2020).
• Flamourakis, G. et al. Laser-made 3D Auxetic Metamaterial Scaffolds for Tissue Engineering Applications. Macromol. Mater. Eng. 305, 2000238 (2020).
• Frazer, D., Bair, J. L., Homer, E. R. & Hosemann, P. Cryogenic Stress-Driven Grain Growth Observed via Microcompression with in situ Electron Backscatter Diffraction. JOM 72, 2051–2056 (2020).
  
• Gianelle, M. et al. A novel ceramic derived processing route for Multi-Principal Element Alloys. Mater. Sci. Eng. A 793, 139892 (2020).
• Gruber, D. P. et al. Surface oxidation of nanocrystalline CVD TiB2 hard coatings revealed by cross-sectional nano-analytics and in-situ micro-cantilever testing. Surf. Coatings Technol. 399, 126181 (2020).
• Hatada, R., Flege, S., Ensinger, W. & Baba, K. Deposition of diamond-like carbon films on insulating substrates by plasma source ion implantation. Surf. Coatings Technol. 385, 125426 (2020).
• Haviar, S. et al. Nanoindentation and microbending analyses of glassy and crystalline Zr(Hf)Cu thin-film alloys. Surf. Coatings Technol. 399, 126139 (2020).
• Hsu, Y.-C., Li, C.-L. & Hsueh, C.-H. Effects of Al Addition on Microstructures and Mechanical Properties of CoCrFeMnNiAlx High Entropy Alloy Films. Entropy vol. 22 (2020).
  
• Hsu, Y.-C., Li, C.-L. & Hsueh, C.-H. Modifications of microstructures and mechanical properties of CoCrFeMnNi high entropy alloy films by adding Ti element. Surf. Coatings Technol. 399, 126149 (2020).
• Kim, W. et al. Deformation twinning in Au30Ag70 alloy nanowires under tensile strain. J. Alloys Compd. 816, 152586 (2020).
• Kjellin, P., Vikingsson, L., Danielsson, K., Johansson, P. & Wennerberg, A. A nanosized zirconium phosphate coating for PEEK implants and its effect in vivo. Materialia 10, 100645 (2020).
• Kong, B. S. et al. Evaluation of thermal ageing activation energy of δ-ferrite in an austenitic stainless steel weld using nanopillar compression test. Scr. Mater. 186, 236–241 (2020).
• Kuroyanagi, S., Shinoda, K., Yumoto, A. & Akedo, J. Size-dependent quasi Brittle–Ductile transition of single crystalline alpha-alumina particles during microcompression tests. Acta Mater. 195, 588–596 (2020).
• Li, Q. et al. Plastic anisotropy and tension-compression asymmetry in nanotwinned Al–Fe alloys: An in-situ micromechanical investigation. Int. J. Plast. 132, 102760 (2020).
• Luo, H., Zhang, H., Sheng, H., Liu, J. P. & Szlufarska, I. Amorphous shear bands in SmCo5. Mater. Sci. Eng. A 785, 139340 (2020).
• Nedelkovski, V. et al. Influence of experimental constraints on micromechanical assessment of micromachined hard-tissue samples. J. Mech. Behav. Biomed. Mater. 106, 103741 (2020).
• Sarvesha, R. et al. Mechanical property evaluation of second phase particles in a Mg–8Al-0.5Zn alloy using micropillar compression. Mater. Sci. Eng. A 775, 138973 (2020).
• Sorensen, D. et al. Intrinsic toughness of the bulk-metallic glass Vitreloy 105 measured using micro-cantilever beams. Acta Mater. 183, 242–248 (2020).
• Su, R. et al. Ultra-high strength and plasticity mediated by partial dislocations and defect networks: Part I: Texture effect. Acta Mater. 185, 181–192 (2020).
• Tesař, K., Maňák, J., Vaněk, P., Drahokoupil, J. & Hlinka, J. Microstructure and micromechanical properties of GaV4S8 ceramics prepared by single-step solid state synthesis. Ceram. Int. 46, 7045–7049 (2020).
• Topal, E. et al. Numerical and Experimental Study of the Mechanical Response of Diatom Frustules. Nanomaterials vol. 10 (2020).
• Wu, G., Zhang, J., Liu, C., Wang, Q. & Lu, J. Ductility of an ultrastrong glass-crystal nano-dual-phase alloy in sub-micron. Scr. Mater. 183, 17–21 (2020).
  
• Yan, Y. et al. A Quantitative In Situ SEM Bending Method for Stress Relaxation of Microscale Materials at Room Temperature. Exp. Mech. (2020) doi:10.1007/s11340-020-00611-7.
• Yilmaz, H., Williams, C. J. & Derby, B. Size effects on strength and plasticity of ferrite and austenite pillars in a duplex stainless steel. Mater. Sci. Eng. A 793, 139883 (2020).
• Yuan, Z. et al. Effect of heat treatment on the interface of high-entropy alloy particles reinforced aluminum matrix composites. J. Alloys Compd. 822, 153658 (2020).
• Yun, H.-W., Choi, G.-M., Woo, H. K., Oh, S. J. & Hong, S.-H. Superhydrophobic, Antireflective, Flexible Hard Coatings with Mechanically Ultra-Resilient Moth-Eye Structure for Foldable Displays. Curr. Appl. Phys. (2020) doi:https://doi.org/10.1016/j.cap.2020.07.001.
• Zaid, H., Aleman, A. & Kodambaka, S. Size-dependent yielding and strain-hardening of compositionally-enriched body-centered cubic VNbTaMoW alloy. Scr. Mater. 178, 518–521 (2020).
• Zhu, Q. et al. In-situ micro-compression of single-crystal aluminum alloy 6063. Mater. Sci. Eng. A 775, 138974 (2020).
• Xu, S., Xie, D., Liu, G., Ming, K. & Wang, J. Quantifying the resistance to dislocation glide in single phase FeCrAl alloy. Int. J. Plast. 132, 102770 (2020).

• Anwar Ali, H. P., Radchenko, I., Li, N. & Budiman, A. Effect of multilayer interface through in situ fracture of Cu/Nb and Al/Nb metallic multilayers. J. Mater. Res. 34, 1564–1573 (2019).
• Briggs, S. A. et al. Development of the In-Situ Ion Irradiation SEM at Sandia National Laboratories. Microsc. Microanal. 25, 1596–1597 (2019).
• Buchinger, J. et al. Toughness enhancement in TiN/WN superlattice thin films. Acta Mater. 172, 18–29 (2019).
• Chen, Y. et al. Measurements of elastic modulus and fracture toughness of an air plasma sprayed thermal barrier coating using micro-cantilever bending. Surf. Coatings Technol. 374, 12–20 (2019).
• Cui, Y., Derby, B., Li, N. & Misra, A. Design of bicontinuous metallic nanocomposites for high-strength and plasticity. Mater. Des. 166, 107602 (2019).
• Daniel, R. et al. Anisotropy of fracture toughness in nanostructured ceramics controlled by grain boundary design. Mater. Des. 161, 80–85 (2019).
• Deng, Y., Rogne, B. R. S. & Barnoush, A. In-situ microscale examination of hydrogen effect on fracture toughness: A case study on B2 and D03 ordered iron aluminides intermetallic alloys. Eng. Fract. Mech. 217, 106551 (2019).
• Ding, J. et al. Thick grain boundary induced strengthening in nanocrystalline Ni alloy. Nanoscale 11, 23449–23458 (2019).
• Duan, P. et al. Intermediate temperature brittleness in a directionally solidified nickel-based superalloy M4706. Mater. Sci. Eng. A 759, 530–536 (2019).
• Fan, C. et al. Helium irradiation induced ultra-high strength nanotwinned Cu with nanovoids. Acta Mater. 177, 107–120 (2019).
  
• Frazer, D. & Hosemann, P. Plasticity of UO2 studied and quantified via elevated temperature micro compression testing. J. Nucl. Mater. 525, 140–144 (2019).
• Frazer, D. et al. Elevated temperature microcantilever testing of fresh U-10Mo fuel. J. Nucl. Mater. 526, 151746 (2019).
• Fuger, C. et al. Influence of Tantalum on phase stability and mechanical properties of WB2. MRS Commun. 9, 375–380 (2019).
• Fu, J., Zong, H., Hu, X. & Zhang, H. Study on ultra-high sensitivity piezoelectric effect of GaN micro/nano columns. Nano Converg. 6, 33 (2019).
• Gao, M. Y. et al. In-situ transmission electron microscopy investigation of compressive deformation in interphase-precipitated carbide-strengthened α-iron single-crystal nanopillars. Mater. Sci. Eng. A 746, 406–415 (2019).
• Glechner, T. et al. Assessment of ductile character in superhard Ta-C-N thin films. Acta Mater. 179, 17–25 (2019).
• Gómez-Cortés, J. F. et al. Ultrahigh superelastic damping at the nano-scale: A robust phenomenon to improve smart MEMS devices. Acta Mater. 166, 346–356 (2019).
• Gruber, D. P. et al. Gradients of microstructure, stresses and mechanical properties in a multi-layered diamond thin film revealed by correlative cross-sectional nano-analytics. Carbon N. Y. 144, 666–674 (2019).
  
• Hahn, R., Kirnbauer, A., Bartosik, M., Kolozsvári, S. & Mayrhofer, P. H. Toughness of Si alloyed high-entropy nitride coatings. Mater. Lett. 251, 238–240 (2019).
• Howard, C. et al. Coupling multi-scale mechanical testing techniques reveals the existence of a trans-granular channel fracture deformation mechanism in high dose Inconel X-750. J. Nucl. Mater. 517, 17–34 (2019).
• Howard, C., Judge, C. D. & Hosemann, P. Applying a new push-to-pull micro-tensile testing technique to evaluate the mechanical properties of high dose Inconel X-750. Mater. Sci. Eng. A 748, 396–406 (2019).
• Howard, C., Judge, C. D., Vo, H. T., Griffiths, M. & Hosemann, P. In Situ SEM Push-to-Pull Micro-tensile Testing of Ex-service Inconel X-750 BT - Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors. in (eds. Jackson, J. H., Paraventi, D. & Wright, M.) 743–757 (Springer International Publishing, 2019).
• Hu, Z. et al. Micro-mechanical properties of homogeneous- and inhomogeneous-structured pillars in Al–TiC nanocomposite: An in-situ study. Mater. Sci. Eng. A 762, 138084 (2019).
• Hu, Z. et al. Microstructure Formation and Micropillar Compression of Al-TiC Nanocomposite Manufactured by Solidification Nanoprocessing. Metall. Mater. Trans. A 50, 4620–4631 (2019).
• Issa, I., Hohenwarter, A., Fritz, R. & Kiener, D. Fracture properties of ultrafine grain chromium correlated to single dislocation processes at room temperature. J. Mater. Res. 34, 2370–2383 (2019).
• Kim, J. & Tasan, C. C. Microstructural and micro-mechanical characterization during hydrogen charging: An in situ scanning electron microscopy study. Int. J. Hydrogen Energy 44, 6333–6343 (2019).
• Lee, Y.-J. et al. Auxetic elastomers: Mechanically programmable meta-elastomers with an unusual Poisson’s ratio overcome the gauge limit of a capacitive type strain sensor. Extrem. Mech. Lett. 31, 100516 (2019).
• Lehnert, R., Weidner, A., Motylenko, M. & Biermann, H. Strain Hardening of Phases in High-Alloy CrMnNi Steel as a Consequence of Pre-Deformation Studied by Nanoindentation. Adv. Eng. Mater. 21, 1800801 (2019).
• Li, B., Nan, Y., Zhao, X., Zhang, P. & Song, X. Graphene-size-tuned mechanical serration behaviors in nanocarbons. Acta Mater. 162, 116–125 (2019).
• Li, Q. et al. High temperature thermal and mechanical stability of high-strength nanotwinned Al alloys. Acta Mater. 165, 142–152 (2019). Ming, K. et al. Strength and plasticity of amorphous silicon oxycarbide. J. Nucl. Mater. 516, 289–296 (2019).
• Liu, X. et al. Robust Icephobic Performance of Flexible Needles. ChemNanoMat 5, 175–180 (2019).
• Li, Y. et al. Bioinspired strong nanocellular composite prepared with magnesium phosphate cement and polyurea aerogel. Mater. Lett. 237, 274–277 (2019).
• Meindlhumer, M. et al. Biomimetic hard and tough nanoceramic Ti–Al–N film with self-assembled six-level hierarchy. Nanoscale 11, 7986–7995 (2019).
  
• Ming, K. et al. Influence of Metal Additives on Microstructure and Properties of Amorphous Metal–SiOC Composites. JOM 71, 2445–2451 (2019).
• Musiienko, D. et al. Ultrafast actuation of Ni-Mn-Ga micropillars by pulsed magnetic field. Scr. Mater. 162, 482–485 (2019).
• Nautiyal, P., Zhang, C., Champagne, V., Boesl, B. & Agarwal, A. In-situ creep deformation of cold-sprayed aluminum splats at elevated temperatures. Surf. Coatings Technol. 372, 353–360 (2019).
• Němeček, J., Maňák, J., Němeček, J. & Krejčí, T. Effect of vacuum and Focused Ion Beam generated heat on fracture properties of hydrated cement paste. Cem. Concr. Compos. 100, 139–149 (2019).
• Park, Y.-G., Kim, H., Park, S.-Y., Kim, J.-Y. & Park, J.-U. Instantaneous and Repeatable Self-Healing of Fully Metallic Electrodes at Ambient Conditions. ACS Appl. Mater. Interfaces 11, 41497–41505 (2019).
• Pozuelo, M., Lefebvre, J., Srivastava, P. & Gupta, V. Stishovite formation at very low pressures in soda-lime glass. Scr. Mater. 171, 6–9 (2019).
• Pozuelo, M., Stremfel, J. W., Yang, J.-M. & Marian, J. Strengthening to softening transition in lath martensite. Materialia 5, 100254 (2019).
• Robertson, A. L., Solá, F., Zhu, D., Salem, J. & White, K. W. Microscale fracture mechanisms of HfO2-Si environmental barrier coatings. J. Eur. Ceram. Soc. 39, 2409–2418 (2019).
  
• Seibert, R. L., Jolly, B. C., Balooch, M., Schappel, D. P. & Terrani, K. A. Production and characterization of TRISO fuel particles with multilayered SiC. J. Nucl. Mater. 515, 215–226 (2019).
• Seo, E. J. et al. Constituent-specific properties in quenching and partitioning (Q&P) processed steel. Mater. Sci. Eng. A 740–741, 439–444 (2019).
  
• Sorensen, D. et al. Investigation of a dissimilar vitreloy 105 to grade 2 titanium laser weld. Mater. Sci. Eng. A 742, 33–43 (2019).
• Sperr, M., Zhang, Z. L., Ivanov, Y. P., Mayrhofer, P. H. & Bartosik, M. Correlating elemental distribution with mechanical properties of TiN/SiNx nanocomposite coatings. Scr. Mater. 170, 20–23 (2019).
• Su, R. et al. Phase transformation induced plasticity in high-strength hexagonal close packed Co with stacking faults. Scr. Mater. 173, 32–36 (2019).
• Touazine, H., Chadha, K., Jahazi, M. & Bocher, P. Characterization of Subsurface Microstructural Alterations Induced by Hard Turning of Inconel 718. J. Mater. Eng. Perform. 28, 7016–7024 (2019).
• Vo, H. T. et al. In Situ Microtensile Testing for Ion Beam Irradiated Materials BT - Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors. in (eds. Jackson, J. H., Paraventi, D. & Wright, M.) 593–603 (Springer International Publishing, 2019).
• Wang, J.-Y. et al. Effect of solute content and temperature on the deformation mechanisms and critical resolved shear stress in Mg-Al and Mg-Zn alloys. Acta Mater. 170, 155–165 (2019).
• Wu, J., Kao, C. R. & Yang, J. Mechanical Reliability Assessment of Cu_6Sn_5 Intermetallic Compound and Multilayer Structures in Cu/Sn Interconnects for 3D IC Applications. in 2019 IEEE 69th Electronic Components and Technology Conference (ECTC) 2258–2265 (2019). doi:10.1109/ECTC.2019.000-8.
• Wu, J. Y., Chiu, Y. S., Wang, Y. W. & Kao, C. R. Mechanical characterizations of single-crystalline (Cu, Ni)6Sn5 through uniaxial micro-compression. Mater. Sci. Eng. A 753, 22–30 (2019).
• Xue, S. et al. High strength, deformable nanotwinned Al–Co alloys. Mater. Res. Lett. 7, 33–39 (2019).
• Yilmaz, H., Williams, C. J., Risan, J. & Derby, B. The size dependent strength of Fe, Nb and V micropillars at room and low temperature. Materialia 7, 100424 (2019).
• Yuan, Z. et al. Microstructure and properties of high-entropy alloy reinforced aluminum matrix composites by spark plasma sintering. J. Alloys Compd. 806, 901–908 (2019).
• Zhao, X. X. et al. Critical dimension for the dislocation structure in deformed copper micropillars. Scr. Mater. 163, 137–141 (2019).

• Alfreider, M., Kozic, D., Kolednik, O. & Kiener, D. In-situ elastic-plastic fracture mechanics on the microscale by means of continuous dynamical testing. Mater. Des. 148, 177–187 (2018).
• Anderson, K. P., Vinci, R. P. & Chan, H. M. Novel metal–ceramic composite microstructures produced through the partial reduction of CoTiO3. J. Mater. Sci. 53, 8193–8210 (2018).
• Ayyagari, A., Hasannaeimi, V., Arora, H. & Mukherjee, S. Electrochemical and Friction Characteristics of Metallic Glass Composites at the Microstructural Length-scales. Sci. Rep. 8, 906 (2018).
• Bartosik, M. et al. Fracture toughness of Ti-Si-N thin films. Int. J. Refract. Met. Hard Mater. 72, 78–82 (2018).
• Bazilchuk, M. S. et al. Deformation and Fracture of Micron-Sized Metal-Coated Polymer Spheres: An In Situ Study. Adv. Eng. Mater. 20, 1800049 (2018).
• Bhowmick, S., Hintsala, E., Stauffer, D. & Asif, S. A. S. In-situ SEM and TEM Nanomechanical Study of Wear and Failure Mechanisms. Microsc. Microanal. 24, 1934–1935 (2018).
• Bjørn Rune Sørås Rogne, Nousha Kheredmand, Yun Deng, Afrooz Barnoush. In situ micromechanical testing in environmental scanning electron microscope: A new insight into hydrogen-assisted cracking. Acta Materialia, 144 (2018): 257-268
• C. Howard, C.D. Judge, D. Poff, S. Parker, M. Griffiths, P. Hosemann. A novel in-situ, lift-out, three-point bend technique to quantify the mechanical properties of an ex-service neutron irradiated inconel X-750 component. Journal of Nuclear Materials, 498 (2018): 149-158
• Cui, F. Y., Kundu, A., Krause, A., Harmer, M. P. & Vinci, R. P. Surface energies, segregation, and fracture behavior of magnesium aluminate spinel low-index grain boundary planes. Acta Mater. 148, 320–329 (2018).
• Dang, C. et al. Direct quantification of mechanical responses of TiSiN/Ag multilayer coatings through uniaxial compression of micropillars. Vacuum 156, 310–316 (2018).
• Denise Yin, Christopher J. Marvel, Fiona Yuwei Cui, Richard P. Vinci, Martin P. Hammer. Microstructure and fracture toughness of electrodeposited Ni-21 at.% W alloy thick films. Acta Materialia, 143 (2018): 272-280
• Ding, J. et al. Mechanical behavior of structurally gradient nickel alloy. Acta Mater. 149, 57–67 (2018).
• Durgaprasad, A. et al. Delamination of Pearlitic Steel Wires: The Defining Role of Prior-Drawing Microstructure. Metall. Mater. Trans. A 49, 2037–2047 (2018).
• Gao, M. Cryo-Ultramicrotomy of Complex Molecular Fluids. Micros. Today 26, 32–41 (2018).
• Gwak, E.-J., Jeon, H., Song, E., Kang, N.-R. & Kim, J.-Y. Twinned nanoporous gold with enhanced tensile strength. Acta Mater. 155, 253–261 (2018).
• Hahn, R., Bartosik, M., Arndt, M., Polcik, P. & Mayrhofer, P. H. Annealing effect on the fracture toughness of CrN/TiN superlattices. Int. J. Refract. Met. Hard Mater. 71, 352–356 (2018).
• Han, Y., Detournay, C., Cundall, P. & Abousleiman, Y. Investigation of Kerogen’s Effects on Hydraulic Fracturing Using a Micromechanical HF Simulator. 52nd U.S. Rock Mechanics/Geomechanics Symposium 8 (2018).
• Hintsala, E. D. & Gerberich, W. W. Dislocation shielding at elevated temperatures in pre-cracked microscale silicon. Materialia 4, 175–181 (2018).
• Hirakata, H., Kawai, T., Kondo, T. & Minoshima, K. Plastic deformation dominates chemical reactions in Ti/Si multilayered nanofilms. Mater. Sci. Eng. A 737, 105–114 (2018).
• Hirakata, H., Shimbara, K., Kondo, T. & Minoshima, K. Size effect on tensile creep behavior of micrometer-sized single-crystal gold. Materialia 1, 221–228 (2018).
• Jeong, J., Alfreider, M., Konetschnik, R., Kiener, D. & Oh, S. H. In-situ TEM observation of {101¯2} twin-dominated deformation of Mg pillars: Twinning mechanism, size effects and rate dependency. Acta Mater. 158, 407–421 (2018).
• Jiang, C., Zhang, H., Song, J. & Lu, Y. Digital micromirror device (DMD)-based high-cycle tensile fatigue testing of 1D nanomaterials. Extrem. Mech. Lett. 18, 79–85 (2018).
• Jhou, W. T., Wang, C., Ii, S. & Hsueh, C. H. Nanoscaled superelastic behavior of shape memory alloy/metallic glass multilayered films. Compos. Part B Eng. 142, 193–199 (2018).
• Kabbani, M. A. et al. Consolidation of functionalized graphene at ambient temperature via mechano-chemistry. Carbon N. Y. 134, 491–499 (2018).
• Khanal, S. R. et al. Characterization of small-scale surface topography using transmission electron microscopy. Surf. Topogr. Metrol. Prop. 6, 45004 (2018).
• Koizumi, R. et al. Origami-Inspired 3D Interconnected Molybdenum Carbide Nanoflakes. Adv. Mater. Interfaces 5, 1701113 (2018).
• Lee, H. J. et al. Evaluation of thermal aging of δ-ferrite in austenitic stainless steel weld using nanopillar compression test. Scr. Mater. 155, 32–36 (2018).
• Leifeng Liu, Qingqing Ding, Yuan Zhong, Ji Zou, Jing Wu, Yu-Lung Chiu, Jixue Li, Ze Zhang, Qian Yu, Zhijian Shen. Dislocation network in additive manufactured steel breaks strength-ductility trade-off. MaterialsToday, 21.4 (2018): 354-361
• Libo Gao, Jian Song, Zengbao Jiao, Weibing Liao, Junhua Luan, James Utama Surjadi, Junyang Li, Hongti Zhang, Dong Sun, Chain Tsuan Liu, Yang Lu. High‐Entropy Alloy (HEA)‐Coated Nanolattice Structures and Their Mechanical Properties. Advanced Engineering Materials, 20.1 (2018)
• Liu, L. et al. Dislocation network in additive manufactured steel breaks strength–ductility trade-off. Mater. Today 21, 354–361 (2018).
  
• Lu, Y., Ding, R. G., Chiu, Y. L. & Jones, I. P. Tomographic investigation of the effects of second phases on the biodegradation and nano-mechanical performance of a Mg–Zn–Ca alloy. Materialia 4, 1–9 (2018).
• Lu, Y., Huang, Y. & Wu, J. Laser additive manufacturing of structural-graded bulk metallic glass. J. Alloys Compd. 766, 506–510 (2018).
• Maňák, J. & Vokoun, D. Microbending Experiments on Pure Magnesium with Nonbasal Slip Orientation. Materials vol. 11 (2018).
• M. Bartosik, R. Hahn, Z.L. Zhang, I. Ivanov, M. Arndt, P. Polcik, P.H. Mayrhofer. Fracture toughness of Ti-Si-N thin films. International Journal of Refractory Metals and Hard Materials, 72 (2018): 78-82
• Mo, L., Guo, C., Zhou, Z., Wu, F. & Liu, C. Microstructural evolution of Cu–Sn–Ni compounds in full intermetallic micro-joint and in situ micro-bending test. J. Mater. Sci. Mater. Electron. 29, 11920–11929 (2018).
• Nautiyal, P., Mujawar, M., Boesl, B. & Agarwal, A. In-situ mechanics of 3D graphene foam based ultra-stiff and flexible metallic metamaterial. Carbon N. Y. 137, 502–510 (2018).
• Pastrama, M.-I., Blanchard, R., Clement, J. G., Pivonka, P. & Hellmich, C. Modal analysis of nanoindentation data, confirming that reduced bone turnover may cause increased tissue mineralization/elasticity. J. Mech. Behav. Biomed. Mater. 84, 217–224 (2018).
• Prasitthipayong, A. et al. Micro mechanical testing of candidate structural alloys for Gen-IV nuclear reactors. Nucl. Mater. Energy 16, 34–45 (2018).
• Radchenko, I., Anwarali, H. P., Tippabhotla, S. K. & Budiman, A. S. Effects of interface shear strength during failure of semicoherent Metal–Metal nanolaminates: An example of accumulative roll-bonded Cu/Nb. Acta Mater. 156, 125–135 (2018).
• R. Hahn, M. Bartosik, M. Arndt, P. Polcik, P.H. Mayrhofer. Annealing effect on the fracture toughness of CrN/TiN superlattices. International Journal of Refractory Metals and Hard Materials, 71 (2018): 352-356
• Rogne, B. R. S., Kheradmand, N., Deng, Y. & Barnoush, A. In situ micromechanical testing in environmental scanning electron microscope: A new insight into hydrogen-assisted cracking. Acta Mater. 144, 257–268 (2018).
• Seidl, W. M., Bartosik, M., Kolozsvári, S., Bolvardi, H. & Mayrhofer, P. H. Influence of Ta on the fracture toughness of arc evaporated Ti-Al-N. Vacuum 150, 24–28 (2018).
• Sharma, A., Hickman, J., Gazit, N., Rabkin, E. & Mishin, Y. Nickel nanoparticles set a new record of strength. Nat. Commun. 9, 4102 (2018).
• Snartland, B. D., Alvaro, A., Osen, V. & Thaulow, C. Crack arrest testing at the micro-scale. Eng. Fract. Mech. 201, 157–166 (2018).
• Sumigawa, T., Byungwoon, K., Mizuno, Y., Morimura, T. & Kitamura, T. In situ observation on formation process of nanoscale cracking during tension-compression fatigue of single crystal copper micron-scale specimen. Acta Mater. 153, 270–278 (2018).
• Su, R. et al. Deformation mechanisms in FCC Co dominated by high-density stacking faults. Mater. Sci. Eng. A 736, 12–21 (2018).
• Thevamaran, R. et al. Size Effects in Single-Crystal Metallic Micro- and Nanocubes BT - Micro and Nanomechanics, Volume 5. in (eds. Starman, L. & Hay, J.) 47–49 (Springer International Publishing, 2018).
• Wang, D. P. et al. Microscale mechanical properties of ultra-high-strength polysynthetic TiAl-Ti3Al single crystals. Mater. Sci. Eng. A 732, 14–20 (2018).
• Wang, X. F., Han, R., Han, T. L., Han, N. X. & Xing, F. Determination of elastic properties of urea-formaldehyde microcapsules through nanoindentation based on the contact model and the shell deformation theory. Mater. Chem. Phys. 215, 346–354 (2018).
• Wunderle, B. et al. Thermo-mechanical characterisation of thin sputtered copper films on silicon: Towards elasto-plastic, fatigue and subcritical fracture-mechanical data. in 2018 19th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) 1–13 (2018). doi:10.1109/EuroSimE.2018.8369901.
• Xu, C. et al. Ultralight and resilient Al2O3 nanotube aerogels with low thermal conductivity. J. Am. Ceram. Soc. 101, 1677–1683 (2018).
• Xue, S. et al. Strengthening mechanisms and deformability of nanotwinned AlMg alloys. J. Mater. Res. 33, 3739–3749 (2018).
• Yin, D., Marvel, C. J., Cui, F. Y., Vinci, R. P. & Harmer, M. P. Microstructure and fracture toughness of electrodeposited Ni-21 at.% W alloy thick films. Acta Mater. 143, 272–280 (2018).
• Yun Deng, Afrooz Barnoush. Hydrogen embrittlement revealed via novel in situ fracture experiments using notched micro-cantilever specimens. Acta Materialia, 142 (2018): 236-247
• Zhang, Y. F. et al. Ultra-strong nanotwinned Al–Ni solid solution alloys with significant plasticity. Nanoscale 10, 22025–22034 (2018).

2017

• A. Abboud, C. Kirchlechner, J. Keckes, T. Conka Nurdan, S. Send, J. S. Micha, O. Ulrich, R. Hartmann, L. Strüder, U. Pietsch. Single-shot full strain tensor determination with microbeam X-ray Laue diffraction and a two-dimensional energy-dispersive detector. Journal of Applied Crystallography, 50 (2017): 901-908
• A.B. Hagen, B.D. Snartland, C. Thaulow. Temperature and orientation effects on the deformation mechanisms of α-Fe micropillars. Acta Materialia, 129 (2017): 398-407
• A. Durgaprasad, S. Giri, S. Lenda, S. Kundu, S. Mishra, S. Chandra, R. D. Doherty, I. Samajdar. Microstructures and Mechanical Properties of as-Drawn and Laboratory Annealed Pearlitic Steel Wires. Metallurgical and Materials Transactions A, 48.10 (2017)L 4583-4597
• Alin Cristain Chipara, Peter Samora Owuor, Sanjit Bhowmick, Gustavo Brunetto, S.A. Syed Asif, Mircea Chipara, Robert Vajtai, Jun Luo, Douglas S. Galvao, Chandra Sekhar Tiwary, Pulickel M. Ajayan. Structural Reinforcement through Liquid Encapsulation. Advanced Materials Interfaces, 4.2 (2017)
• A. Reichardt, A. Lupinacci, D. Frazer, N. Bailey, H. Vo, C. Howard, Z. Jiao, A.M. Minor, P. Chou, P. Hosemann. Nanoindentation and in situ microcompression in different dose regimes of proton beam irradiated 304 SS. Journal of Nuclear Materials, 486 (2017): 323-331
• B.D. Snartland, A.B. Hagen, C. Thaulow. Fracture mechanical testing of single crystal notched α-iron micro-cantilevers. Engineering Fracture Mechanics, 175 (2017): 312-323
• Bongkyun Jang, Alexander E. Mag-isa, Jae-Hyun Kim, Byungwoon Kim, Hak-Joo Lee, Chung-Seog Oh, Takashi Sumigawa, Takayuki Kitamura. Uniaxial fracture test of freestanding pristine graphene using in situ tensile tester under scanning electron microscope. Extreme Mechanics Letters, 14 (2017) 10-15
• Bongkyun Jang, Byungwoon Kim, Jae-Hyun Kim, Hak-Joo Lee, Takashi Sumigawa, and Takayuki Kitamura. Asynchronous cracking with dissimilar paths in multilayer graphene. Nanoscale, 44 (2017)
• Chencheng Xu, Haolun Wang, Jianan Song, Xiaopeng Bai, Zhenglian Liu, Minghao Fang, Yongshuai Yuan, Junyuan Sheng, Xiaoyan Li, Ning Wang, Hui Wu. Ultralight and resilient Al2O3 nanotube aerogels with low thermal conductivity. Journal of the American Ceramic Society, 101.4 (2017): 1677-1683
• Dong Hun Sin, Sae Byeok Jo, Seung Goo Lee, Hyomin Ko, Min Kim, Hansol Lee, Kilwon Cho. Enhancing the Durability and Carrier Selectivity of Perovskite Solar Cells Using a Blend Interlayer. ACS Applied Materials and Interfaces, 9.21 (2017): 18103-18112
• Ge Wu, Ka-Cheung Chan, Linli Zhu, Ligang Sun, Jian Lu. Dual-phase nanostructuring as a route to high-strength magnesium alloys. Nature, 545 (2017): 80-83
• Jiří Bočan, Sadahiro Tsurekawa, Aleš Jäger. Fabrication and in situ compression testing of Mg micropillars with a nontrivial cross section: Influence of micropillar geometry on mechanical properties. Materials Science and Engineering: A, 687 (2017): 337-342
• Jinwoo Kim, Hyun Seok Oh, Wan Kim, Pyuck-Pa Choi, Dierk Raabe, Eun Soo Park. Modulation of plastic flow in metallic glasses via nanoscale networks of chemical heterogeneities. Acta Materialia, 140 (2017): 116-129
• J. J. Yu, J. Y. Wu, L. J. Yu, H. W. Yang, C. R. Kao. Micromechanical behavior of single-crystalline Cu6Sn5 by picoindentation. Journal of Materials Science, 52.12 (2017): 7166-7174
• J. Kabel, Y. Yang, M. Balooch, C. Howard, T. Koyanagi, K.A. Terrani, Y. Katoh, P. Hosemann. Micro-mechanical evaluation of SiC-SiC composite interphase properties and debond mechanisms. Composites Part B: Engineering, 131 (2017): 173-183
• Jose F. Gómez-Cortés, Maria L. Nó, Iñaki López-Ferreño, Jesus Hernández-Saz, Sergio I. Molina, Andrey Chuvilin, Jose M. San Juan. Size effect and scaling power-law for superelasticity in shape-memory alloys at the nanoscale. Nature, 12 (2017): 790-796
• Jørn Skogsrud, Christian Thaulow. Effect of crystallographic orientation on nanomechanical modelling of an iron single crystal cracked cantilever beam. Materials Science and Engineering: A, 684 (2017): 274-283
• J. Snel, M. A. Monclús, M. Castillo-Rodríguez, N. Mara, I. J. Beyerlein, J. Llorca, J. M. Molia-Aldareguía. Deformation Mechanism Map of Cu/Nb Nanoscale Metallic Multilayers as a Function of Temperature and Layer Thickness. JOM, 69.11 (2017): 2214-2226
• L.J. Yu, H.W. Yen, J.Y. Wu, J.J. Yu, C.R. Kao. Micromechanical behavior of single crystalline Ni3Sn4 in micro joints for chip-stacking applications. Materials Science and Engineering: A, 685 (2017): 123-130
• Maria Koifman Khristosov, Shiri Dishon, Imrit Noi, Alex Katsman, Boaz Pokroy. Pore and ligament size control, thermal stability and mechanical properties of nanoporous single crystals of gold. Nanoscale, 38 (2017)
• M. Barosik, C. Rumeau. R. Hahn, Z.L. Zhang, P.H. Mayrhofer. Fracture toughness and structural evolution in the TiAlN system upon annealing. Scientific Reports, 7 (2017)
• Ok-Kyung Park, Chandra Sekhar Tiwary, Yang Yang, Sanjit Bhowmick, Soumya Vinod, Qingbo Zhang, Vicki L. Colvin, S.A. Syed Asif, Robert Vajtai, Evgeni S. Penev, Boris I. Yakobson, Pulickel M. Ajayan. Magnetic field controlled graphene oxide-based origami with enhanced surface area and mechanical properties. Nanoscale, 21 (2017)
• R. Fritz, D. Wimler, A. Leitner, V. Maier-Kiener, D. Kiener. Dominating deformation mechanisms in ultrafine-grained chromium across length scales and temperatures. Acta Materialia, 140 (2017): 176-187
• R. Konetschnik, R. Daniel, R. Brunner, D. Kiener. Selective interface toughness measurements of layered thin films. AIP Advances, 7 (2017)
• Sarah C. L. Fischer, Katja Groß, Oscar Torrents Abad, Michael M. Becker, Euiyoung Park, René Hensel, Eduard Arzt. Funnel‐Shaped Microstructures for Strong Reversible Adhesion. Advanced Materials Interfaces, 4.20 (2017)
• Sun-Young Park, Eun-Ji Gwak, Ming Huang, Rodney S. Ruoff, Ju-Young, Kim. Nanolaminate of metallic glass and graphene with enhanced elastic modulus, strength, and ductility in tension. Scripta Materialia, 139 (2017): 63-66
• Wei-Zhong Han, Jian Zhang, Ming-Shuai Ding, Lan Lv, Wen-Hong Wang, Guang-Heng Wu, Zhi-Wei Shan, Ju Li. Helium Nanobubbles Enhance Superelasticity and Retard Shear Localization in Small-Volume Shape Memory Alloy. Nano Letters, 17.6 (2017): 3725-3730
• Yanli Nan, Bo Li, Xiang Zhao, Xiaolong Song, Lei Su. Probing the mechanical properties of carbon nanohorns subjected to uniaxial compression and hydrostatic pressure. Carbon, 125 (2017): 236-244
• Y. Deng, T. Hajilou, D. Wan, N. Kheradmand, A. Barnoush. In-situ micro-cantilever bending test in environmental scanning electron microscope: Real time observation of hydrogen enhanced cracking. Scripta Materialia, 127 (2017): 19-23
• Y.H. Wu, C. Wang, C.H. Hsueh, T.H. Li, C.H. Chang, H.C. Chen, J.S.C. Jang, J.C. Huang, Z.H. Ma. Microstructure and mechanical properties of Zr-Ti-Cu-Nd metallic glass composites. Journal of Alloys and Compounds, 702 (2017): 318-326
• Zehui Du, Pengcheng Ye, Xiao Mei Zeng, Christopher A. Schuh, Nobumichi Tamura, Xinran Zhou, Chee Lip Gan. Synthesis of monodisperse CeO2–ZrO2 particles exhibiting cyclic superelasticity over hundreds of cycles. Journal of the American Ceramic Society, 100.9 (2017): 4199-4208
• Zhe Fan, Qiang Li, Jin Li, Sichuang Xue, Haiyan Wang, Xinghang Zhang. Tailoring plasticity of metallic glasses via interfaces in Cu/amorphous CuNb laminates. Journal of Materials Research, 32.14 (2017): 2680-2689
• Z.Y. Liang, J.T.M. De Hosson, M.X. Huang. Size effect on deformation twinning in face-centred cubic single crystals: Experiments and modelling. Acta Materialia, 139 (2017): 1-10

2016 

• A. Hohenwarter, B. Völker, M. W. Kapp, Y. Li, S. Goto, D. Raabe, R. Pippan. Ultra-strong and damage tolerant metallic bulk materials: A lesson from nanostructured pearlitic steel wires. Scientific Reports, 6 (2016)
• C. Howard, D. Frazer, A. Lupinacci, S. Parker, R.Z. Valiev, C. Shin, B. William Choi, P. Hosemann. Investigation of specimen size effects by in-situ microcompression of equal channel angular pressed copper. Materials Science and Engineering: A, 649 (2016): 104-113
• Hongti Zhang, Kai Wing Siu, Weibing Liao, Qing Wang, Yong Yang, Yang Lu. In situ mechanical characterization of CoCrCuFeNi high-entropy alloy micro/nano-pillars for their size-dependent mechanical behavior. Materials Research Express, 3.9 (2016)
• H. Zhang, C. Jiang, Y. Lu. Low-Cycle Fatigue Testing of Ni Nanowires Based on a Micro-Mechanical Device. Experimental Mechanics (2016): 1-6
• Jinwoo Kim, Joon Seok Kyeong, Moon-Ho Ha, Andrew M. Minor, Do Hyang Kim, Eun Soo Park. Development of Mo‐Ni‐Si‐B metallic glass with high thermal stability and H versus E ratios. Materials & Design, 98 (2016): 31-40
• Jung-A Lee, Brandon B. Seo, In-Chul Choi, Moo-Young Seok, Yakai Zhao, Zeinab Jahed, Upadrasta Ramamurty, Ting Y. Tsui,Jae-il Jang. Time-dependent nanoscale plasticity in nanocrystalline nickel rods and tubes. Scripta Materialia, 112 (2016): 79-82
• Ke Chen, Xuke Tang, Yonghai Yue, Hewei Zhao, Lin Guo. Strong and Tough Layered Nanocomposites with Buried Interfaces. ACS Nano, 10.4 (2016): 4816-4827
• M. Pozuelo, Y.W. Chang, J. Marian, J.M. Yang. Serrated flow in nanostructured binary Mg-Al alloys. Scripta Materialia, 127 (2016): 178-181
• Nousha Kheradmanda, Alain Franz Knor, Michael Marx, Yun Deng. Microscopic incompatibility controlling plastic deformation of bicrystals. Acta Materialia, 106 (2016): 219-228
• Núria Cinca, Anna M. Vilardell, Sergi Dosta, Amadeu Concustell, Irene Garcia Cano, Josep Maria Guilemany, Sonia Estradé, Alicia Ruiz, Francesca Peiró. A New Alternative for Obtaining Nanocrystalline Bioactive Coatings: Study of Hydroxyapatite Deposition Mechanisms by Cold Gas Spraying. Journal of the American Ceramic Society, 99.4 (2016): 1420-1428
• P.J. Imrich , C. Kirchlechner, G. Dehm. Influence of inclined twin boundaries on the deformation behavior of Cu micropillars. Materials Science and Engineering: A, 642 (2016): 65-70
• R. Fritz, V. Maier-Kiener, D. Lutz, D. Kiener. Interplay between sample size and grain size: Single crystalline vs. ultrafine-grained chromium micropillars. Materials Science and Engineering: A, 674 (2016): 626-633
• Rostislav Daniel, Michael Meindlhumer , Jakub Zalesak, Bernhard Sartory, Angelika Zeilinger, Christian Mitterer, Jozef Keckes. Fracture toughness enhancement of brittle nanostructured materials by spatial heterogeneity: A micromechanical proof for CrN/Cr and TiN/SiOx multilayers. Materials & Design, 104 (2016): 227-234
• Rostislav Daniel, Michael Meindlhumer , Jakub Zalesak, Bernhard Sartory, Angelika Zeilinger, Christian Mitterer, Jozef Keckes. Grain boundary design of thin films: Using tilted brittle interfaces for multiple crack deflection toughening. Acta Materialia, 122 (2016): 130-137
• Sehmus Ozden, Chandra Sekhar Tiwary, Jianyu Yao, Gustavo Brunetto, Sanjit Bhowmick, Syed Asif, Robert Vajtai, Pulickel M. Ajayan. Highly ordered carbon-based nanospheres with high stiffness. Carbon, 105 (2016): 144-150
• Sehmus Ozden, Yang Yang, Chandra Sekhar Tiwary, Sanjit Bhowmick, Syed Asif, Evgeni S. Penev, Boris I. Yakobson, Pulickel M. Ajayan. Indentation Tests Reveal Geometry-Regulated Stiffening of Nanotube Junctions. Nano Letters, 16.1 (2016): 232-236
• Wanjun Cao, Chris Marvel, Denise Yin, Yuanyao Zhang, Partrick Cantwell, Martin Hammer, Jian Luo, Richard Vinci. Correlations between microstructure, fracture morphology, and fracture toughness of nanocrystalline Ni–W alloys. Scripta Materialia, 113 (2016): 84-88
• Xiao Mei Zeng, Alan Lai, Chee Lip Gan, Christopher A. Schuh. Crystal orientation dependence of the stress-induced martensitic transformation in zirconia-based shape memory ceramics. Acta Materialia, 116 (2016): 124-135
• Xiaoyue Ni, Julia R. Greer, Kaushik Bhattacharya, Richard D. James, Xian Chen. Exceptional Resilience of Small-Scale Au30Cu25Zn45 under Cyclic Stress-Induced Phase Transformation. Nano Letters, 16.12 (2016): 7621-7625
• Y. N. Abousleiman, K. L. Hull, Y. Han, G. Al-Muntasheri, P. Hosemann, S. Parker, C. B. Howard. The granular and polymer composite nature of kerogen-rich shale. Acta Geotechnica, 11.3 (2016): 573-594
• Youbin Kim, Jinwook Baek, Sunghwan Kim, Sangmin Kim, Seunghwa Ryu, Seokwoo Jeon, Seung Min Han. Radiation Resistant Vanadium-Graphene Nanolayered Composite. Scientific Reports, 6 (2016)

2015 

• Anja Weidner, Horst Biermann. Combination of Different In Situ Characterization Techniques and Scanning Electron Microscopy Investigations for a Comprehensive Description of the Tensile Deformation Behavior of a CrMnNi TRIP/TWIP Steel. JOM, 67.8 (2015): 1729-1747
• B. Nagamani Jaya, Sanjit Bhowmick, S.A. Syed Asif, Oden L. Warren, Vikram Jayaram. Optimization of clamped beam geometry for fracture toughness testing of micron-scale samples. Philosophical Magazine, 95.16-18 (2015)
• Byungil Hwang, Mijeong Kang, Subin Lee, Christopher R. Weinberger, Phillip Loya, Jun Lou, Sang Ho Oh, Bongsoo Kim, Seung Min Han. Effect of surface energy on size-dependent deformation twinning of defect-free Au nanowires. Nanoscale, 7 (2015): 15657-15664
• D. Frazer, M.D. Abad, D. Krumwiede, C.A. Back, H.E. Khalifa, C.P. Deck, P. Hosemann. Localized mechanical property assessment of SiC/SiC composite materials. Composites Part A: Applied Science and Manufacturing, 70 (2015): 93-101
• Jiří Bočan, Jan Maňák, Aleš Jäger. Nanomechanical analysis of AZ31 magnesium alloy and pure magnesium correlated with crystallographic orientation. Materials Science and Engineering: A, 644 (2015): 121-128
• Lian-Yi Chen, Jia-Quan Xu, Hongseok Choi, Marta Pozuelo, Xiaolong Ma, Sanjit Bhowmick, Jenn-Ming Yang, Suveen Mathaudhu, Xiao-Chun Li. Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles. Nature, 528 (2015): 539-543
• M. Pozuelo, Y.W.Chang, J.M.Yang. Effect of diamondoids on the microstructure and mechanical behavior of nanostructured Mg-matrix nanocomposites. Materials Science and Engineering: A, 633 (2015): 200-208
• M.W. Kapp, C. Kirchlechner, R. Pippan, G. Dehm. Importance of dislocation pile-ups on the mechanical properties and the Bauschinger effect in microcantilevers. 
  Journal of Materials Research, 30.6 (2015): 791-797
• Rui Huang, Qing-Jie Li, Zhang-Jie Wang, Ling Huang, Ju Li, Evan Ma, Zhi-Wei Shan. Flow Stress in Submicron BCC Iron Single Crystals: Sample-size-dependent Strain-rate Sensitivity and Rate-dependent Size Strengthening. Materials Research Letters, 3.3 (2015)
• Won Seok Choi, Bruno C. De Cooman, Stefanie Sandlöbes, Dierk Raabe. Size and orientation effects in partial dislocation-mediated deformation of twinning-induced plasticity steel micro-pillars. Acta Materialia, 98 (2015): 391-404

2014 

• A. Lupinacci, J. Kacher, A. Eilenberg, A.A. Shapiro, P. Hosemann, A.M. Minor. Cryogenic in situ microcompression testing of Sn. Acta Materialia, 78 (2014): 56-64
• Chuantong Chen, Nobuyuki Shishido, Shoji Kamiya, Kozo Koiwa, Hisashi Sato, Masaki Omiya, Masahiro Nishida, Takashi Suzuki, Tomoji Nakamura, Takeshi Nokuo, Toshiaki Suzuki. Evaluation for interface strength fluctuations induced by inhomogeneous grain structure of Cu line in LSI Interconnects. Microelectronic Engineering, 120 (2014): 52-58
• Erik Camposilvan, Oscar Torrents, Marc Anglada. Small-scale mechanical behavior of zirconia. Acta Materialia, 80 (2014): 239-249
• In-Chul Choi, Yong-Jae Kim, Byungmin Ahn, Megumi Kawasaki, Terence G. Langdon, Jae-il Jang. Evolution of plasticity, strain-rate sensitivity and the underlying deformation mechanism in Zn–22% Al during high-pressure torsion. Scripta Materialia, 75 (2014): 102-105
• K. Vanstreels, I. DeWolf, H. Zahedmanesh, H. Bender, M. Gonzalez, J. Lefebvre, S. Bhowmick. In-situ scanning electron microscopy study of fracture events during back-end-of-line microbeam bending tests. Applied Physics Letters, 105 (2014)
• M. J. McLean, C. A. Wade, M. Watanabe, R. P. Vinci. Microscale Fracture Toughness of Bismuth Doped Copper Bicrystals Using Double Edge Notched Microtensile Tests. Experimental Mechanics, 54.4 (2014): 685-688
• Nobuyuki Shishido, Yuka Oura, Hisashi Sato, Shoji Kamiya, Kozo Koiwa, Masaki Omiya, Masahiro Nishida, Takashi Suzuki, Tomoji Nakamura, Takeshi Nokuo, Toshiaki Suzuki. Crystal orientation effect on local adhesion strength of the interface between a damascene copper line and the insulation layer. Microelectronic Engineering, 120 (2014): 71-76
• P.G. Allison, R.D. Moser, J.P. Schirer, R.L. Martens, J.B. Jordon, M.Q. Chandler. In-situ nanomechanical studies of deformation and damage mechanisms in nanocomposites monitored using scanning electron microscopy. Materials Letters, 131 (2014): 313-316
• Yoshimasa Takahashi, Hikaru Kondo, Hironobu Niimi, Takeshi Nokuo, Toshiaki Suzuki. Fracture strength analysis of single-crystalline silicon cantilevers processed by focused ion beam. Sensors and Actuators A: Physical, 206 (2014): 81-87

2013

• Shoji Kamiya, Nobuyuki Shishido, Shinsuke Watanabe, Hisashi Sato, Kozo Koiwa, Masaki Omiya, Masahiro Nishida, Takashi Suzuki, Tomoji Nakamura, Takeshi Nokuo, Tadahiro Nagasawa. Grain-scale adhesion strength mapping of copper wiring structures in integrated circuits. Surface and Coatings Technology, 215 (2013): 280-284
• Hussein Nili, Kourosh Kalantar-zadeh, Madhu Bhaskaran, Sharath Sriram. In situ nanoindentation: Probing nanoscale multifunctionality. Progress in Materials Science, 58.1 (2013): 1-29
• W. Cao, A. Kundu, Z. Yu, M.P. Harmer, R.P. Vinci. Direct correlations between fracture toughness and grain boundary segregation behavior in ytterbium-doped magnesium aluminate spinel. Scripta Materialia, 69.1 (2013): 81-84
• M. Pozuelo, Y.W.Chang, J.-M.Yang. In-situ microcompression study of nanostructured Mg alloy micropillars. Materials Letters, 108 (2013): 320-323
• Yong-Jae Kim, Won Woo Lee, In-Chul Choi, Byung-Gil Yoo, Seung Min Han, Hong-Gyu Park, Won Il Park, Jae-il Jang. Time-dependent nanoscale plasticity of ZnO nanorods. Acta Materialia, 61.9 (2013): 7180-7188

2012

• Andreas Sedlmayr, Erik Bitzek, Daniel S. Gianola, Gunther Richter, Reiner Mönig, Oliver Kraft. Existence of two twinning-mediated plastic deformation modes in Au nanowhiskers. Acta Materialia, 60.9 (2012): 3985-3993.
• Frédéric Mompiou, Marc Legros, Andreas Sedlmayr, Daniel S. Gianola, Daniel Caillard, Oliver Kraft. Source-based strengthening of sub-micrometer Al fibers. Acta Materialia, 60.3 (2012): 977-983
• Kurt E. Johanns, Andreas Sedlmayr, P. Sudharshan Phani, Reiner Mönig, Oliver Kraft, Easo P. George, George M. Pharr. In-situ tensile testing of single-crystal molybdenum-alloy fibers with various dislocation densities in a scanning electron microscope. Journal of Materials Research, 27.3 (2012): 508-520

2011 

• D. S. Gianola, A. Sedlmayr, R. Mönig, C. A. Volkert, R. C. Major, E. Cyrankowski, S. A. S. Asif, O. L. Warren, O. Kraft. In situ nanomechanical testing in focused ion beam and scanning electron microscopes. Review of Scientific Instruments, 82.6 (2011)
• X. Maeder, W.M. Mook, C. Niederberger, J. Michler. Quantitative stress/strain mapping during micropillar compression. Philosophical Magazine, 91.7-9 (2011): 1097-1107

2008 - 2010 

• A. Dubach, R. Raghavan, J.F. Löffler, J. Michler, U. Ramamurty. Micropillar compression studies on a bulk metallic glass in different structural states. Scripta Materialia, 60.7 (2009): 567-570
• C. Niederberger, W.M. Mook, X. Maeder,  J. Michler. In situ electron backscatter diffraction (EBSD) during the compression of micropillars. Materials Science and Engineering: A, 527.16-17 (2010): 4306-4311
• Gunther Richter, Karla Hillerich, Daniel S. Gianola, Reiner Mönig, Oliver Kraft, Cynthia A. Volkert. Ultrahigh Strength Single Crystalline Nanowhiskers Grown by Physical Vapor Deposition. Nano Letters, 9.8 (2009): 3048-3052
• Julia D. Nowak, Karolina A. Rzepiejewska-Malyska, Ryan C. Major, Oden L. Warren, Johann Michler. In-situ nanoindentation in the SEM. Materials Today, 12.1 (2010): 44-45
• K.A. Rzepiejewska-Malyska, G. Buerki, J. Michler, R.C. Major, E. Cyrankowski, S.A.S. Asif, O.L. Warren. In situ mechanical observations during nanoindentation inside a high-resolution scanning electron microscope. Journal of Materials Research, 23.7 (2008): 1973-1979
• K.A. Rzepiejewska-Malyska, W.M. Mook, M. Parlinska-Wojtan, J. Hejduk, J. Michler. In situ scanning electron microscopy indentation studies on multilayer nitride films: Methodology and deformation mechanisms. Journal of Materials Research, 24.3 (2009): 1208-1221
• Rudy Ghisleni, Karolina Rzepiejewska-Malyska, Laetitia Philippe, Patrick Schwaller, Johann Michler. In situ SEM indentation experiments: Instruments, methodology, and applications. Microscopy Research and Technique, 72.3 (2009): 242-249
• W M Mook, C Niederberger, M Bechelany, L Philippe, J Michler. Compression of freestanding gold nanostructures: from stochastic yield to predictable flow. Nanotechnology, 21.5 (2009)

• Bokov, A., Rodrigues Neto, J. B., Lin, F. & Castro, R. H. R. Size-induced grain boundary energy increase may cause softening of nanocrystalline yttria-stabilized zirconia. J. Am. Ceram. Soc. 103, 2001–2011 (2020).
• Feng, L., Bokov, A., Dillon, S. J. & Castro, R. H. R. Size-induced room temperature softening of nanocrystalline yttria stabilized zirconia. J. Eur. Ceram. Soc. 40, 2050–2055 (2020).
• Feng, L., Finkeldei, S. C., Heuser, B., Dillon, S. J. & Nelson, A. T. Grain Boundary and Lattice Fracture Toughness of UO2 Measured Using Small-Scale Mechanics. JOM 72, 2075–2081 (2020).
• Gorji, S. et al. Nanowire Facilitated Transfer of Sensitive TEM Samples in a FIB. Ultramicroscopy 113075 (2020) doi:https://doi.org/10.1016/j.ultramic.2020.113075.
• Han, X., Liu, P., Sun, D. & Wang, Q. The role of incoherent interface in evading strength-ductility trade-off dilemma of Ti2AlN/TiAl composite: A combined in-situ TEM and atomistic simulations. Compos. Part B Eng. 185, 107794 (2020).
• Jawaharram, G. S. et al. Irradiation induced creep in nanocrystalline high entropy alloys. Acta Mater. 182, 68–76 (2020).
• Kim, S.-H. et al. Twin boundary sliding in single crystalline Cu and Al nanowires. Acta Mater. 196, 69–77 (2020).
• Liu, B.-Y., Liu, F., Li, B., Nie, J.-F. & Shan, Z.-W. In Situ TEM Investigation of $$ \left\langle {\varvec{c} + \varvec{a}} \right\rangle $$Dislocations in Magnesium BT - Magnesium Technology 2020. in (eds. Jordon, J. B., Miller, V., Joshi, V. V & Neelameggham, N. R.) 135–139 (Springer International Publishing, 2020).
• Liu, J. et al. Effect of Ion Irradiation Introduced by Focused Ion-Beam Milling on the Mechanical Behaviour of Sub-Micron-Sized Samples. Sci. Rep. 10, 10324 (2020).
• Schoell, R., Frazer, D., Zheng, C., Hosemann, P. & Kaoumi, D. In Situ Micropillar Compression Tests of 304 Stainless Steels After Ion Irradiation and Helium Implantation. JOM 72, 2778–2785 (2020).
• Voisin, T. et al. In situ TEM observations of high-strain-rate deformation and fracture in pure copper. Mater. Today 33, 10–16 (2020).
• Xie, D.-G. et al. Deformation mechanism maps for sub-micron sized aluminum. Acta Mater. 188, 570–578 (2020).
• Xin, S. W. et al. Bulk nanocrystalline boron-doped VNbMoTaW high entropy alloys with ultrahigh strength, hardness, and resistivity. J. Alloys Compd. 155995 (2020) doi:https://doi.org/10.1016/j.jallcom.2020.155995.

• Bufford, D. C., Barr, C. M., Wang, B., Hattar, K. & Haque, A. Application of In Situ TEM to Investigate Irradiation Creep in Nanocrystalline Zirconium. JOM 71, 3350–3357 (2019).
• Chen, G. et al. In situ real-time study buckling behavior of boron nitride nanotubes with axial compression by TEM. Chinese Chem. Lett. 30, 1401–1404 (2019).
• Deng, Y. et al. Atomic Resolution Probing of Phase Transformations and Domain Evolution During Large Superelastic Deformation in Ferroelectrics with in situ TEM. Microsc. Microanal. 25, 1850–1851 (2019).
• Deng, Y. et al. Hierarchically-structured large superelastic deformation in ferroelastic-ferroelectrics. Acta Mater. 181, 501–509 (2019).
• Derby, B. et al. Processing of novel pseudomorphic Cu–Mo hierarchies in thin films. Mater. Res. Lett. 7, 1–11 (2019).
• Feng, L., Lu, X., Zhao, T. & Dillon, S. The effect of electrochemical cycling on the strength of LiCoO2. J. Am. Ceram. Soc. 102, 372–381 (2019).
• Gao, M. Y. et al. In-situ transmission electron microscopy investigation of compressive deformation in interphase-precipitated carbide-strengthened α-iron single-crystal nanopillars. Mater. Sci. Eng. A 746, 406–415 (2019).
• Howard, C., Judge, C. D. & Hosemann, P. Applying a new push-to-pull micro-tensile testing technique to evaluate the mechanical properties of high dose Inconel X-750. Mater. Sci. Eng. A 748, 396–406 (2019).
• Hsiao, H.-W., Li, S., Dahmen, K. A. & Zuo, J.-M. Shear banding mechanism in compressed nanocrystalline ceramic nanopillars. Phys. Rev. Mater. 3, 83601 (2019).
• Hu, Z.-W. et al. Graphene-coated tungsten nanowires deliver unprecedented modulus and strength. Mater. Res. Lett. 7, 47–52 (2019).
• Huang, Z., Yang, C., Qi, L., Allison, J. E. & Misra, A. Dislocation pile-ups at β1 precipitate interfaces in Mg-rare earth (RE) alloys. Mater. Sci. Eng. A 742, 278–286 (2019).
• Jawaharram, G. S., Barr, C., Price, P., Hattar, K. & Dillon, S. J. In situ TEM Measurements of Ion Irradiation Induced Creep. Microsc. Microanal. 25, 1566–1567 (2019).
• Jenei, I. Z. et al. Mechanical response of gasoline soot nanoparticles under compression: An in situ TEM study. Tribol. Int. 131, 446–453 (2019).
• Kim, S.-D. et al. Inverse size-dependence of piezoelectricity in single BaTiO3 nanoparticles. Nano Energy 58, 78–84 (2019).
• Kuptsov, K. A., Sheveyko, A. N., Zamulaeva, E. I., Sidorenko, D. A. & Shtansky, D. V. Two-layer nanocomposite WC/a-C coatings produced by a combination of pulsed arc evaporation and electro-spark deposition in vacuum. Mater. Des. 167, 107645 (2019).
• Lai, T.-Y., Lin, K.-P., Liang, S.-W. & Fang, T.-H. Mechanical properties and mechanism of NiTi pillars using in-situ compression and indentation. Mater. Res. Express 6, 45036 (2019).
• Li, P. et al. In situ tensile fracturing of multilayer graphene nanosheets for their in-plane mechanical properties. Nanotechnology 30, 475708 (2019).
• Liu, B.-Y., Prasad, K. E., Yang, N., Liu, F. & Shan, Z.-W. In-situ quantitative TEM investigation on the dynamic evolution of individual twin boundary in magnesium under cyclic loading. Acta Mater. 179, 414–423 (2019).
• Liu, S.-M., Li, S.-H. & Han, W.-Z. Effect of ordered helium bubbles on deformation and fracture behavior of α-Zr. J. Mater. Sci. Technol. 35, 1466–1472 (2019).
• Loginov, P. A. et al. In-situ observation of hardmetal deformation processes by transmission electron microscopy. Part II: Deformation caused by tensile loads. Int. J. Refract. Met. Hard Mater. 84, 105017 (2019).
• Ma, Y.-H. et al. In-situ microcantilever deflection to evaluate the interfacial fracture properties of binary Al2O3/SmAlO3 eutectic. J. Eur. Ceram. Soc. 39, 3277–3282 (2019).
• Milne, Z. B., Bernal, R. A. & Carpick, R. W. Sliding History-Dependent Adhesion of Nanoscale Silicon Contacts Revealed by in Situ Transmission Electron Microscopy. Langmuir 35, 15628–15638 (2019).
• Vishnubhotla, S. B. et al. Matching Atomistic Simulations and In Situ Experiments to Investigate the Mechanics of Nanoscale Contact. Tribol. Lett. 67, 97 (2019).
• Vronka, M., Karlik, M., Vesely, J., Manak, J. & Heczko, O. Suppression of twinning mechanism on nanoscale: size effect in Cu–Ni–Al shape memory alloy. J. Mater. Sci. 54, 6586–6593 (2019).
• Xu, S. et al. Bio-mimic Ti–Ta composite with hierarchical “Brick-and-Mortar” microstructure. Materialia 8, 100463 (2019).
• Yang, P.-J. et al. Mechanism of hardening and damage initiation in oxygen embrittlement of body-centred-cubic niobium. Acta Mater. 168, 331–342 (2019).
• Yuan, Z. et al. Microstructure and properties of high-entropy alloy reinforced aluminum matrix composites by spark plasma sintering. J. Alloys Compd. 806, 901–908 (2019).
• Zhang, Z. et al. Deformation induced new pathways in silicon. Nanoscale 11, 9862–9868 (2019).

• Batllo, F., Tataurova, Y. & Kamrath, M. Colloidal silica: Chemistry, properties and adaptations for electronic polishing applications. in 2018 China Semiconductor Technology International Conference (CSTIC) 1–4 (2018). doi:10.1109/CSTIC.2018.8369265.
• Bernal, R. A. et al. Influence of chemical bonding on the variability of diamond-like carbon nanoscale adhesion. Carbon N. Y. 128, 267–276 (2018).
• Bo, A. et al. Atypical Defect Motions in Brittle Layered Sodium Titanate Nanowires. J. Phys. Chem. Lett. 9, 6052–6059 (2018).
• Bondarev, A. V et al. Hollow spherical and nanosheet-base BN nanoparticles as perspective additives to oil lubricants: Correlation between large-scale friction behavior and in situ TEM compression testing. Ceram. Int. 44, 6801–6809 (2018).
• Cao, K. et al. Size-dependent fracture behavior of silver nanowires. Nanotechnology 29, 295703 (2018).
• Carpick, R. W. et al. Influence of Chemical Bonding on the Variability of Diamond-Like Carbon Nanoscale Adhesion: An In-Situ TEM/Nanoindentation and Molecular Dynamics Study. Microsc. Microanal. 24, 1822–1823 (2018).
• Chang, S.-Y. et al. Preparation and nanoscopic plastic deformation of toughened Al-Cu-Fe-based quasicrystal/vanadium multilayered coatings. Mater. Chem. Phys. 213, 277–284 (2018).
• Cui, Y., Derby, B., Li, N., Mara, N. A. & Misra, A. Suppression of shear banding in high-strength Cu/Mo nanocomposites with hierarchical bicontinuous intertwined structures. Mater. Res. Lett. 6, 184–190 (2018).
• Dassenoy, F. In Situ Friction Tests in a Transmission Electron Microscope BT - Advanced Analytical Methods in Tribology. in (eds. Dienwiebel, M. & De Barros Bouchet, M.-I.) 273–287 (Springer International Publishing, 2018). doi:10.1007/978-3-319-99897-8_10.
• De Hosson, J. T. M. Gaining sight after being blind: A tribute to Jing Zhu. Ultramicroscopy 192, 37–49 (2018).
• Ding, J. et al. Mechanical behavior of structurally gradient nickel alloy. Acta Mater. 149, 57–67 (2018).
• Feng, L., Hao, R., Lambros, J. & Dillon, S. J. The influence of dopants and complexion transitions on grain boundary fracture in alumina. Acta Mater. 142, 121–130 (2018).
• Firestein, K. L. et al. Compressive properties of hollow BN nanoparticles: theoretical modeling and testing using a high-resolution transmission electron microscope. Nanoscale 10, 8099–8105 (2018).
• Gammer, C., Ophus, C., Pekin, T. C., Eckert, J. & Minor, A. M. Local nanoscale strain mapping of a metallic glass during in situ testing. Appl. Phys. Lett. 112, 171905 (2018).
• Gammer, C., Pekin, T. C., Ophus, C., Minor, A. M. & Eckert, J. Deformation localization in metallic glasses studied by in situ TEM deformation. Microsc. Microanal. 24, 1820–1821 (2018).
• Howard, C. et al. A novel in-situ, lift-out, three-point bend technique to quantify the mechanical properties of an ex-service neutron irradiated inconel X-750 component. J. Nucl. Mater. 498, 149–158 (2018).
• Hu, Y. et al. Dislocation avalanche mechanism in slowly compressed high entropy alloy nanopillars. Commun. Phys. 1, 61 (2018).
• Jenei, I. Z. et al. Mechanical characterization of diesel soot nanoparticles:in situcompression in a transmission electron microscope and simulations. Nanotechnology 29, 85703 (2018).
• Jeong, J., Alfreider, M., Konetschnik, R., Kiener, D. & Oh, S. H. In-situ TEM observation of {101¯2} twin-dominated deformation of Mg pillars: Twinning mechanism, size effects and rate dependency. Acta Mater. 158, 407–421 (2018).
• Kim, H.-K., Kim, S.-H., Ahn, J.-P. & Lee, J.-C. Deformation criterion for face-centered-cubic metal nanowires. Mater. Sci. Eng. A 736, 431–437 (2018).
• Kim, K. In Situ Transmission Electron Microscopy Study for Electrical, Thermal and Mechanical Behaviors of Low Dimensional Materials. (Graduate School of UNIST).
• Kim, K., Kim, J. H., Park, B.-E., Kim, H. & Lee, Z. Direct observation of leakage currents in a metal–insulator–metal capacitor using in situ transmission electron microscopy. Nanotechnology 29, 435705 (2018).
• Kim, S.-H. et al. Deformation twinning of ultrahigh strength aluminum nanowire. Acta Mater. 160, 14–21 (2018).
• Lai, T.-Y., Hsiao, Y.-J. & Fang, T.-H. In situdeformation and mechanical properties of bismuth telluride prepared via zone melting. Mater. Res. Express 5, 35010 (2018).
• Lee, J. H. et al. Abnormal elastic modulus behavior in a crystalline–amorphous core–shell nanowire system. Phys. Chem. Chem. Phys. 20, 16276–16284 (2018).
• Li, D., Shu, X., Kong, D., Zhou, H. & Chen, Y. Revealing the atomistic deformation mechanisms of face-centered cubic nanocrystalline metals with atomic-scale mechanical microscopy: A review. J. Mater. Sci. Technol. 34, 2027–2034 (2018).
• Lin, H.-I., Kuo, S.-W., Yen, T.-J. & Lee, O. K. SiNWs Biophysically Regulate the Fates of Human Mesenchymal Stem Cells. Sci. Rep. 8, 12913 (2018).
• Lin, K.-P., Fang, T.-H. & Lin, Y.-J. Mechanical properties and mechanism of single crystal Cu pillar by in situ TEM compression and molecular dynamics simulation. Mater. Res. Express 5, 26516 (2018).
• Liu, X., Szlufarska, I. & Voyles, P. M. In situ Transmission Electron Microscopy of Room-temperature Plastic Deformation and Recovery in Thin 3C-SiC. Microsc. Microanal. 24, 1834–1835 (2018).
• Liu, Z. et al. Tensile deformation and fracture mechanisms of Cu/Nb nanolaminates studied by in situ TEM mechanical tests. Extrem. Mech. Lett. 25, 60–65 (2018).
• Narayan, R. L. et al. Effects of notches on the deformation behavior of submicron sized metallic glasses: Insights from in situ experiments. Acta Mater. 154, 172–181 (2018).
• Nautiyal, P., Mujawar, M., Boesl, B. & Agarwal, A. In-situ mechanics of 3D graphene foam based ultra-stiff and flexible metallic metamaterial. Carbon N. Y. 137, 502–510 (2018).
• Polukhin, V. A. & Vatolin, N. A. Thermal Stability and Deformation Mechanisms in Graphene- or Silicene-Reinforced Layered and Matrix Metallic Composites. Russ. Metall. 2018, 685–699 (2018).
• Yang, L. W. et al. Mechanical properties of metal-ceramic nanolaminates: Effect of constraint and temperature. Acta Mater. 142, 37–48 (2018).
• Yang, W. et al. Probing buckling and post-buckling deformation of hollow amorphous carbon nanospheres: In-situ experiment and theoretical analysis. Carbon N. Y. 137, 411–418 (2018).
• Yano, K. H., Thomas, S., Swenson, M. J., Lu, Y. & Wharry, J. P. TEM in situ cube-corner indentation analysis using ViBe motion detection algorithm. J. Nucl. Mater. 502, 201–212 (2018).
• Zhang, Z. et al. In situ TEM observation of rebonding on fractured silicon carbide. Nanoscale 10, 6261–6269 (2018).
• Zheng, K. et al. In Situ TEM: Theory and Applications BT - Progress in Nanoscale Characterization and Manipulation. in (eds. Wang, R., Wang, C., Zhang, H., Tao, J. & Bai, X.) 381–477 (Springer Singapore, 2018). doi:10.1007/978-981-13-0454-5_7.

2017

• Eric D. Hintsala, Douglas D. Stauffer, Yunje Oh, S.A. Syed Asif. In Situ TEM Scratch Testing of Perpendicular Magnetic Recording Multilayers with a Novel MEMS Tribometer. JOM, 69.1 (2017): 51-56.
• Gowtham Sriram Jawaharram, Shen J. Dillon, Robert S. Averback. Hardening mechanisms in irradiated Cu-W alloys. Journal of Materials Research, 32.16 (2017): 3156-3164.
• K.H. Yano, M.J. Swenson, Y. Wu, J.P. Wharry. TEM in situ micropillar compression tests of ion irradiated oxide dispersion strengthened alloy. Journal of Nuclear Materials, 483 (2017): 107-120.
• Kai-Peng Lin, Ivo Stachiv, Te-Hua Fang. Mechanical properties and deformation mechanism of Al2O3 determined from in situ transmission electron microscopy compression. Materials Research Express, 4.7 (2017).
• L.W. Yang, C. Mayer, N. Li, J.K. Baldwin, N.A. Mara, N. Chawla, J.M. Molina-Aldareguia, J. Llorca. Mechanical properties of metal-ceramic nanolaminates: Effect of constraint and temperature. Acta Materialia, 142 (2017): 37-48
• M.W. Kapp, T. Kremmer, C. Motz, B. Yang, R. Pippan. Structural instabilities during cyclic loading of ultrafine-grained copper studied with micro bending experiments. Acta Materialia, 125 (2017): 351-358.
• Peng Huang, Qian Yu. Dislocation Multiplications in Extremely Small Hexagonal-structured Titanium Nanopillars Without Dislocation Starvation. Scientific Reports, 7 (2017).
• Rui Hao, Aleksander A. Tedstone, David J. Lewis, Chris P. Warrens, Kevin R. West, Philip Howard, Sander Gaemers, Shen J. Dillon, Paul O'Brien. Property Self-Optimization During Wear of MoS. ACS Applied Materials and Interfaces, 9.2 (2017): 1953-1958.
• Shi-Hao Li, Wei-Zhong Han, Ju Li, Evan Ma, Zhi-Wei Shan. Small-volume aluminum alloys with native oxide shell deliver unprecedented strength and toughness. Acta Materialia, 126 (2017): 202-209.
• Shi-Hao Li, Wei-Zhong Han, Zhi-Wei Shan. Deformation of small-volume Al-4Cu alloy under electron beam irradiation. Acta Materialia, 141 (2017): 183-192.
• Shiliang Wang, Zhiwei Shan, Han Huang. The Mechanical Properties of Nanowires. Advanced Science News, 4 (2017).
• Suji Choi, Jong Hoon Lee, Min Wook Pin, Dong Won Jang, Seong-Gu Hong, Boklae Cho, Sang Jun Lee, Jong Seok Jeong, Seong-Hoon Yi, Young Heon Kim. Study on fracture behavior of individual InAs nanowires using an electron-beam-drilled notch. RSC Advances, 7 (2017): 16655-16661
• Vahid Samaeeaghmiyoni, Hosni Idrissi, Jonas Groten, Ruth Schwaiger, Dominique Schryvers. Quantitative in-situ TEM nanotensile testing of single crystal NI facilitated by a new sample preparation approach. Micron, 94 (2017): 66-73.
• Xuying Liu, Ching-Yen Tang, Rui Hao, Kathleen Walsh, Chunliang Zhou, Shen J. Dillon. Local chemo-mechanical insights into the efficacy of ZDDP additives from in situ single asperity growth and mechanical testing. Tribology International, 112 (2017): 103-107.
• Xuying Liu, Rui Hao, Shimin Mao, Shen J. Dillon Scripta Materialia, Shear strengths of FCC-FCC cube-on-cube interfaces. 130 (2017): 178-181.
• Yoones Kabiri, Nadine Schrenker, Julian Mueller, Mirza Mačković, Erdmann Spiecker. Direct observation of dislocation formation and plastic anisotropy in Nb2AlC MAX phase using in situ nanomechanics in transmission electron microscopy. Scripta Materialia, 137 (2017): 104-108.
• Zhaobing Cai, Xiufang Cui, Erbao Liu, Yang Li, Meiling Dong, Bingwen Lu, Guo Jin. Fracture behavior of high-entropy alloy coating by in-situ TEM tensile testing. Journal of Alloys and Compounds, 729 (2017): 897-902
• Zhaobing Cai, Xiufang Cui, Guo Jin, Binwen Lu, Danli Zhang, Zhanming Zhang. In situ TEM tensile testing on high-entropy alloy coating by laser surface alloying. Journal of Alloys and Compounds, 708 (2017): 380-384.
• Zhi Su, Yu-Run Miao, Guanghui Zhang, Jeffrey T. Miller, Kenneth S. Suslick. Bond breakage under pressure in a metal organic framework. Chemical Science, 8 (2017): 8004-8011.
• Zhongquan Liao, Leonardo Medrano Sandonas, Tao Zhang, Martin Gall, Arezoo Dianat, Rafael Gutierrez, Uwe Muehle, Juergen Gluch, Rainer Jordan, Gianaurelio Cuniberti, Ehrenfried Zschech. In-Situ Stretching Patterned Graphene Nanoribbons in the Transmission Electron Microscope. Scientific Reports, 7 (2017).
• Zibin Chen, Liang Hong, Feifei Wang, Simon P. Ringer, Ling-Qing Chen, Haosu Luo, Xiaozhou Liao. Facilitation of Ferroelectric Switching via Mechanical Manipulation of Hierarchical Nanoscale Domain Structures. Physical Review Letters, 118 (2017).
• Zibin Chen, Liang Hong, Feifei Wang, Simon P. Ringer, Long-Qing Chen, Haosu Luo, Xiaozhou Liao. Facilitation of Ferroelectric Switching via Mechanical Manipulation of Hierarchical Nanoscale Domain Structures. Phys. Rev. Lett., 118.1-6 (2017).

2016 

• Aaron Kobler, Christian Brandl, Horst Hahn, and Christian Kübel. In situ observation of deformation processes in nanocrystalline face-centered cubic metals. Beilstein Journal of Nanotechnology, 7 (2016): 572-580.
• Aleksander A. Tedstone, David J. Lewis, and Paul O'Brien. Synthesis, Properties, and Applications of Transition Metal-Doped Layered Transition Metal Dichalcogenides. Chemistry of Materials, 28.7 (2016): 1965-1974.
• C. Gammer, J. Kacher, C. Czarnik, O. L. Warren, J. Ciston, A. M. Minor. Local and transient nanoscale strain mapping during in situ deformation. Applied Physics Letters, 109.8 (2016).
• Daniel C. Bufford, Douglas Stauffer, William M. Mook, S. A. Asif, Brad L. Boyce, Khalid Hattar. High Cycle Fatigue in the Transmission Electron Microscope. Nano Letters, 16.8 (206): 4946-4953.
• Degang Xie, Suzhi Li, Meng Li, Zhangjie Wang, Peter Gumbsch, Jun Sun, Evan Ma, Ju Li, Zhiwei Shan. Hydrogenated vacancies lock dislocations in aluminum. Nature Communications, 7 (2016).
• E. Tochigi , E. Zepeda, H.-R. Wenk, A. M. Minor. In Situ TEM Observation of Twinning, Detwinning and Retwinning in Quartz. MEMS and Nanotechnology, 5 (2016).
• E.D. Hintsala, A.J. Wagner, W.W. Gerberich, K.A. Mkhoyan. The role of back stress in sub-50 nm Si nanocubes. Scripta Materialia, 114 (2016): 51-55.
• Hosni Idrissi, Caroline Bollinger, Francesca Boioli, Dominique Schryvers, Partick Cordier. Low-temperature plasticity of olivine revisited with in situ TEM nanomechanical testing. Science Advances, 2.3 (2016).
• J. Wu, X.Q. Wang, W. Wang, M.M. Attallah, M.H. Loretto. Microstructure and strength of selectively laser melted AlSi10Mg. Acta Materialia, 117 (2016): 311-320.
• J. Zalesak, M. Bartosik, R. Daniel, C. Mitterer, C. Krywka, D. Kiener, P.H. Mayrhofer, J. Keckes. Cross-sectional structure-property relationship in a graded nanocrystalline Ti1-xAlxN thin film. Acta Materialia, 102 (2016): 212-219.
• J.P. Liebig, M. Göken, G. Richter, M. Mackovic, T. Przybilla, E. Spiecker, O.N. Pierron, B. Merle. A flexible method for the preparation of thin film sample for in situ TEM characterization combining shadow-FIB milling and electron-beam-assisted etching. Ultramicroscopy, 117 (2016): 82-88.
• Jong Hoon Lee, Min Wook Pin, Su Ji Choi, Min Hyeok Jo, Jae Cheol Shin, Seong-Gu Hong, Seung Mi Lee, Boklae Cho, Sang Jung Ahn, Nam Woong Song, Seong-Hoon Yi, Young Heon Kim. Electromechanical Properties and Spontaneous Response of the Current in InAsP Nanowires. Nano Letters, 16.11 (2016): 6738-3745.
• Josh Kacher, Qian Yu, Claire Chisolm, Cristoph Gammer, Andrew M. Minor. In Situ TEM Nanomechanical Testing. MEMS and Nanotechnology, 5 (2016).
• Lie Yang, Tao Kai, Yuecun Wang, Degang Xie, R. Lakshmi Narayan, Ju Li, Xiaohui Ning. Chestnut-like SnO2/C nanocomposites with enhanced lithium ion storage properties. Nano Energy, 30 (2016): 885-891.
• Lin Jiang, Tao Hu, Hanry Yang, Dalong Zhang,Troy Topping, Enrique J. Lavernia, and Julie M. Schoenung. Deformation of a ceramic/metal interface at the nanoscale. Nanoscale, 8 (2016): 10541-10547.
• Lin Tian, Xiao-Lei Wang, Zhi-Wei Shan. Mechanical Behavior of Micronanoscaled Metallic Glass. Materials Research Letters, 4.2 (2016).
• Liqiang Zhang, Yuecun Wang, Degang Xie, Yushu Tang, Chunyang Wu, Lishan Cui, Yongfeng Li, Xiaohui Ning, Zhiwei Shan. In situ transmission electron microscopy study of the electrochemical sodiation process for a single CuO nanowire electrode. RSC Advances, 6 (2016): 11441-11445.
• Liqiang Zhang, Yushu Tang, Yuecun Wang, Yongli Duan, Degang Xie, Chunyang Wu, Lishan Cui, Yongfeng Li, Xiaohui Ning, Zhiwei Shan. In situ TEM observing structural transitions of MoS2 upon sodium insertion and extraction. RSC Advances, 98 (2016).
• M. Mackovic, F. Niekiel, L. Wondraczek, E. Bitzek, E. Spiecker. In situ mechanical quenching of nanoscale silica spheres in the transmission electron microscope. Scripta Materialia, 121 (2016): 70-74.
• Nicholas A. Yaraghi, Nicolás Guarín-Zapata, Lessa K. Grunenfelder, Eric Hintsala, Sanjit Bhowmick, Jon M. Hiller, Mark Betts, Edward L. Principe, Jae-Young Jung, Leigh Sheppard, Richard Wuhrer, Joanna McKittrick, Pablo D. Zavattieri, David Kisailus. A Sinusoidally Architected Helicoidal Biocomposite. Advanced Materials, 28.32 (2016): 6835-6844.
• Ping-Chi Tsai, Yeau-Ren Jeng. In-Situ nanomechanical study on bending characteristics of individual multi-walled carbon nanotubes. Materials Science and Engineering: A, 658 (2016): 389-392.
• Pylin Sarobol , Michael Chandross, Jay D. Carroll, William M. Mook, Daniel C. Bufford, Brad L. Boyce, Khalid Hattar, Paul G. Kotula, Aaron C. Hall. Room Temperature Deformation Mechanisms of Alumina Particles Observed from In Situ Micro-compression and Atomistic Simulations. Journal of Thermal Spray Technology, 25.1 (2016): 82-93.
• Rajen B. Patel, Tsengming Chou, Alokik Kanwal, David J. Apigo, Joseph Lefebvre, Frank Owens, Zafar Iqbal. Boron-Filled Hybrid Carbon Nanotubes. Scientific Reports, 6 (2016).
• T. Hu, K. Ma, T.D. Topping, L. Jiang, D. Zhang, A.K. Mukherjee, J.M. Schoenung, E.J. Lavernia. Disordered dislocation configuration in submicrometer Al crystal subjected to plane strain bending. Scripta Materialia, 113 (2016): 35-38.
• Xue Fan, Dongfeng Diao. The adhesion behavior of carbon coating studied by re-indentation during in situ TEM nanoindentation. Applied Surface Science, 362 (2016): 49-55.
• Yi-Chieh Hsieh, Ling Zhang, Tsai-Fu Chung, Yu-Ting Tsai, Jer-Ren Yang, Takahito Ohmura, Takuya Suzuki. In-situ transmission electron microscopy investigation of the deformation behavior of spinodal nanostructured σ-ferrite in a duplex stainless steel. Scripta Materialia, 125 (2016): 44-49.
• Yi-nan Cuia, Zhan-li Liu, Zhang-jie Wang, Zhuo Zhuang. Mechanical annealing under low-amplitude cyclic loading in micropillars. Journal of the Mechanics and Physics of Solids, 89 (2016): 1-15.
• Yue-Cun Wang, Lin Tian, Fan Liu, Yuan-Bin Qin, Gong Zheng, Jing-Tao Wang, Evan Ma, Zhi-Wei Shan. Helium Ion Microscope Fabrication Causing Changes in the Structure and Mechanical Behavior of Silicon Micropillars. Small, 13.1 (2016).
• Yue-cun Wang, Wei Zhang, Li-yuan Wang, Zhuo Zhuang, En Ma, Ju Li, Zhi-wei Shan. In situ TEM study of deformation-induced crystalline-to-amorphous transition in silicon. NPG Asia Materials, 8.291 (2016).
• Yujie Chen, Tim Burgess, Zianghai An, Yiu-Wing Mai, H. Hoe Tan, Jin Zou, Simon Ringer, Chennupati Jagadish, Xiaozhou Liao. Effect of a High Density of Stacking Faults on the Young's Modulus of GaAs Nanowires. Nano Letters, 16.3 (2016): 1911-1916.
• Yujie Chen, Xiaozhou Liao. Chapter Four - Mechanical Behaviors of Semiconductor Nanowires. Semiconductors and Semimetals, 94 (2016): 109-158.
• Zhang-Jie Wang, Frances I. Allen, Zhi-Wei Shan, Peter Hosemann. Mechanical behavior of copper containing a gas-bubble superlattice. Acta Materialia, 121 (2016): 78-84.

2015 

• Aaron Kobler, Andrea Hodge, Horst Hahn, Christian Kübel. Orientation dependent fracture behavior of nanotwinned copper. Applied Physics Letters, 106 (2015).
• Aaron Kobler,Thorsten Beuth, Tobias Klöffel, Robby Prang, Markus Moosmann, Torsten Scherer, Stefan Walheim, Horst Hahn, Christian Kübel, Bernd Meyer, Thomas Schimmel, Erik Bitzek. Nanotinned silver nanowires: Structure and mechanical properties. Acta Materialia, 92.15 (2015): 299-308.
• Aleksander A. Tedstone, David J. Lewis, Rui Hao, Shi-Min Mao, Pascal Bellon, Robert S. Averback, Christopher P. Warrens, Kevin R. West, Philip Howard, Sander Gaemers Shen J. Dillon, Paul O’Brien. Mechanical Properties of Molybdenum Disulfide and the Effect of Doping: An in Situ TEM Study. Applied Materials & Interfaces, 7.37 (2015): 20829-20834.
• Andrew J. Wagner, Eric D. Hintsala, Prashant Kumar, William W. Gerberich, K. Andre Mkhoyan. Mechanisms of plasticity in near-theoretical strength sub-100 nm Si nanocubes. Acta Materialia, 100 (2015): 256-265.
• B. Volker, W. Heinz, R. Roth, J.M. Batke, M.J. Cordill, G. Dehm. Downscaling metal-dielectric interface fracture experiments to sub-micron dimensions: A feasibility study using TEM. Surface and Coatings Technology, 270 (2015): 1-7.
• Bo-Yu Liu, Liang Wan, Jian Wang, Evan Ma, Zhi-Wei Shan. Terrace-like morphology of the boundary created through basal-prismatic transformation in magnesium. Scripta Materialia, 100 (2015): 86-89.
• David Framil Carpeño, Takahito Ohmura, Ling Zhang, Jérôme Leveneur, Michelle Dickinson, Christopher Seal, John Kennedy, Margaret Hyland. Nanomechanical and in situ TEM characterization of boron carbide thin films on helium implanted substrates: Delamination, real-time cracking and substrate buckling. Materials Science and Engineering: A, 639 (2015): 54-64.
• E. Hintsala , D. Kiener, J. Jackson, W. W. Gerberich. In-Situ Measurements of Free-Standing, Ultra-Thin Film Cracking in Bending. Experimental Mechanics, 55.9 (2015): 1681-1690.
• J. W. Ma, W. J. Lee, J. M. Bae, K. S. Jeong, S. H. Oh, J. H. Kim, S.-H. Kim, J.-H. Seo, J.-P. Ah‡, H. Kim, M.-H. Cho. Carrier Mobility Enhancement of Tensile Strained Si and SiGe Nanowires via Surface Defect Engineering. Nano Letters, 15.11 (2015): 7204-7210.
• J. Wang, Y.G. Shen, F. Song, F.J. Ke, Y.L. Bai, C. Lu. Size-dependent brittle-to-ductile transition in GaAs nano-rods. Engineering Fracture Mechanics, 150 (2015): 135-142.
• Lisa Y. Chen, Mo-rigen He, Jungho Shin, Gunther Richter, & Daniel S. Gianola. Measuring surface dislocation nucleation in defect-scarce nanostructures. Nature Materials, 14 (2015): 707-713.
• Peter J. Imrich, Christoph Kirchlechner, Daniel Kiener, Gerhard Dehm. Internal and external stresses: In situ TEM compression of Cu bicrystals containing a twin boundary. Scripta Materialia, 100 (2015): 94-97.
• Q. Yu, M. Legros, A.M. Minor. In situ TEM nanomechanics. MRS Bulletin, 40.01 (2015): 62-70.
• S. Kiani, C. Ratsch, A.M. Minor, J.-M Yang, S. Kodambaka. In situ transmission electron microscopy observations of room-temperature plasticity in sub-micron-size TaC(100) and TaC(011) single crystals. Scripta Materialia, 100 (2015): 13-16.
• S. Kiani, C. Ratsch, A.M. Minor, J.-M Yang, S. Kodambaka. Orientation- and size-dependent room-temperature placticity in ZrC crystals. Scripta Materialia, 95.9 (2015).
• Sara Kiani, Jenn-Ming Yang, Suneel Kodambaka. Nanomechanics of Refractory Transition-Metal Carbides: A Path to Discovering Plasticity in Hard Ceramics. Journal of the American Ceramic Society, 98.8 (2015): 2313-2323.
• Tao Hu, Lin Jiang, Hanry Yanga, Kaka Ma, Troy D. Topping, Joshua Yee, Meijuan Li, Amiya K. Mukherjee, Julie M. Schoenung, Enrique J. Laverni. Stabilized plasticity in ultrahigh strength, submicron Al crystals. Acta Materialia, 94 (2015): 46-58.
• Tao-Hsing Chen, Chih-Kai Tsai. The Microstructural Evolution and Mechanical Properties of Zr-Based Metallic Glass under Different Strain Rate Compressions. Materials, 8.4 (2015): 1831-1840.
• Te-Hua Fang , Yu-Jen Hsiao, Shao-Hui Kang. Mechanical characteristics of copper indium gallium diselenide compound nanopillars using in situ transmission electron microscopy compression. Scripta Materialia, 108 (2015): 130-135.
• Tevis D. B. Jacobs, Joel Lefever, Robert W. Carpick. Measurement of the Length and Strength of Adhesive Interactions in a Nanoscale Silicon–Diamond Interface. B. Volker, W. Heinz, R. Roth, J.M. Batke, M.J. Cordill, G. Dehm
• Wei-Zhong Han, Ling Huang, Shigenobu Ogata, Hajime Kimizuka, Zhao-Chun Yang, Christopher Weinberger, Qing-Jie Li, Bo-Yu Liu, Xi-Xiang Zhang, Ju Li, Evan Ma, Zhi-Wei Shan. From “Smaller is Stronger” to “Size-Independent Strength Plateau”: Towards Measuring the Ideal Strength of Iron. Advanced Materials, 27.22 (2015): 3385-3390.
• Xiaoguang Wang, Kai Chen, Yongqiang Zhang, Jingchun Wan, Oden L. Warren, Jason Oh, Ju Li, Evan Ma, Zhiwei Shan. Growth Conditions Control the Elastic and Electrical Properties of ZnO Nanowires. Nano Letters, 15.12 (2015): 7886-7892.
• Yue-cun Wang, De-gang Xie, Xiao-hui Ning, Zhi-wei Shan. Thermal treatment-induced ductile-to-brittle transition of submicron-sized Si pillars fabricated by focused ion beam. Applied Physics Letters, 106 (2015).
• Yujie Chen, Qiang Gao, Yanbo Wang, Xianghai An Xiaozhou Liao, Yiu-Wing Mai, H. Hoe Tan, Jin Zou, Simon P. Ringer, Chennupati Jagadish. Determination of Young's Modulus of Ultrathin Nanomaterials. Nano Letters, 15.8 (2015): 5279-5283.
• Zhang-Jie Wang, Qing-Jie Li, Yi-Nan Cui, Zhan-Li Liu, Evan Ma, Ju Li, Jun Sun, Zhuo Zhuang, Ming Dao, Zhi-Wei Shan, Subra Suresh. Cyclical deformation leads to defect healing and strengthening of small-voume metal crystals. PNAS, 112.44 (2015): 13502-13507.

2014 

• Bin Chen, Jun Wang, Yiwei Zhu, Xiaozhou Liao, Chunsheng Lu, Yiu-Wing Mai, Simon P. Ringer, Fujiu Ke, Yaogen Shen. Deformation-induced phase transformation in 4H–SiC nanopillars. Acta Materialia, 80 (2014): 392-399.
• Ding-Shiang Wang, Shou-Yi Chang, Yi-Chung Huang, Jin-Bao Wu, Hong-Jen Lai, Ming-Sheng Leu. Nanoscopic observations of stress-induced formation of graphitic nanocrystallites at amorphous carbon surfaces. Carbon, 74 (2014): 302-311.
• Hosni Idrissi, Aaron Kobler, Behnam Amin-Ahmadi, Michael Coulombier, Montserrat Galceran, Jean-Pierre Raskin, Stéphane Godet, Christian Kübel, Thomas Pardoen, Dominique Schryvers. Plasticity mechanisms in ultrafine grained freestanding aluminum thin films revealed by in-situ transmission electron microscopy nanomechanical testing. Applied Physics Letters, 104.101903 (2014).
• Jorgen F. Rufner, Ricardo H.R. Castro, Troy B. Holland, Klaus van Benthem. Mechanical properties of individual MgAl2O4 agglomerates and their effects on densification. Acta Materialia, 69 (2014): 187-195.
• Korhan Sahin, Nicholas A. Fasanella, Ioannis Chasiotis, Kevin M. Lyons, Bradley A. Newcomb, Manjeshwar G. Kamath, Han Gi Chae, Satish Kumar. High strength micron size carbon fibers from polyacrylonitrile–carbon nanotube precursors. Carbon, 77 (2014): 442-453.
• Ling Zhang, Nobuaki Sekido, Takahito Ohmura. Real time correlation between flow stress and dislocation density in steel during deformation. Materials Science and Engineering: A, 611 (2014): 188-193.
• S. Kiani, K.W.K. Leung, V. Radmilovic, A.M. Minor, J.-M. Yang, D.H. Warner, S. Kodambaka. Dislocation glide-controlled room-temperature plasticity in 6H-SiC single crystals. Acta Materialia, 80 (2014): 400-406.
• Shang-Chao Hung. Direct real-time observation on nanoscale mechanical behavior of freestanding GaN short nano-bridge. Journal of Materials Science: Materials in Electronics, 26.1 (2014): 307-311.
• Shao-Hui Kang, Te-Hua Fang. Size effect on compression properties of GaN nanocones examined using in situ transmission electron microscopy. Journal of Alloys and Compounds, 597 (2014): 72-78.
• Sheng Dai, Jiong Zhao, Mo-rigen He, Ziaoguang Wang, Jinchun Wan, Zhiwei Shan, Jing Zhu. Elastic Properties of GaN Nanowires: Revealing the Influence of Planar Defects on Young's Modulus at Nanoscale. Nano Letters, 15.1 (2014): 8-15.
• Shimin Mao, Sezer Özerinç, William P. King, Robert S. Averback, Shen J. Dillon. Effect of irradiation damage on the shear strength of Cu–Nb interfaces. Scripta Materialia, 90-91 (2014): 29-32.
• Xiao Lei Wang, Feng Jiang, Horst Hahn, Ju Li, Herbert Gleiter, Jun Sun, Ji Xiang Fang. Plasticity of a scandium-based nanoglass. Scripta Materialia, 98 (2014): 40-43.
• ZhangJie Wang, Zhiwei Shan, Ju Li, Jun Sun, Evan Ma. An index for deformation controllability of small-volume materials. Science China Technological Sciences, 57.4 (2014): 663-670.

2013

• A.S. Schneider, D. Kiener, C.M. Yakacki, H.J. Maier, P.A. Gruber, N. Tamura, M. Kunz, A.M. Minor, C.P. Frick. Influence of bulk pre-straining on the size effect in nickel compression pillars. Materials Science and Engineering: A, 559 (2013): 147-158.
• Bin Chen, Jun Wang, Qiang Gao, Yujie Chen, Xiaozhou Liao, Chunsheng Lu, Hark Hoe Tan, Yiu-Wing Mai, Jin Zou, Simon P. Ringer, Huajian Gao, Chennupati Jagadish. Strengthening Brittle Semiconductor Nanowires through Stacking Faults: Insights from in Situ Mechanical Testing. Nano Letters, 13.9 (2013): 4369-4373.
• Bin Chen, Qiang Gao, Li Chang, Yanbo Wang, Zibin Chen, Xiaozhou Liao, Hark Hoe Tan, Jin Zou, Simon P. Ringer, Chennupati Jagadish. Attraction of semiconductor nanowires: An in situ observation. Acta Materialia, 61.19 (2013): 7166-7172.
• Bin Chen, Qiang Gao, Yanbo Wang, Xiaozhou Liao, Yiu-Wing Mai, Hark Hoe Tan, Jin Zou, Simon P. Ringer, Chennupati Jagadish. Anelastic Behavior in GaAs Semiconductor Nanowires. Nano Letters, 13.7 (2013): 3169-3172.
• Bin Xiang, Lei Wang, Gao Liu, Andrew M. Minor. Electromechanical Probing of Li/Li2CO3 Core/Shell Particles in a TEM. Journal of The Electromechanical Society, 160.3 (2013).
• Cheng-Cai Wang, Yun-Wei Mao, Zhi-Wei Shan, Ming Dao, Ju Li, Jun Sun, Evan Ma, Subra Suresh. Real-time, high-resolution study of nanocrystallization and fatigue cracking in a cyclically strained metallic glass. Proceedings of the National Academy of Sciences of the United States of America, 110.49 (2013): 19725-19730.
• Hua Guo, Kevin Wang, Yu Deng, Y. Oh, S. A. Syed Asif, O. L. Warren, Z. W. Shan, J. Wu, A. M. Minor. Nanomechanical actuation from phase transitions in individual VO2 micro-beams.Applied Physics Letters, 102.23 (2013).
• Qian Yu, Jun Sun, John W. Morris Jr., Andrew M. Minor. Source mechanism of non-basal〈c + a〉slip in Ti alloy. Scripta Materialia, 69.1 (2013): 57-60.
• Seung Min Han, Gang Feng, Joo Young Jung, Hee Joon Jung, James R. Groves, William D. Nix, Yi Cui. Critical-temperature/Peierls-stress dependent size effects in body centered cubic nanopillars. Applied Physics Letters, 102.4 (2013).
• Shao-Hui Kang, Te-Hua Fang, Tao-Hsing Chen, Ching-Hong Kuo. Size effect on nanomechanical properties of ZnO cones using in situ transmission electron microscopy. Current Applied Physics, 13.8 (2013): 1689-1696.
• Shao Hui Kang, Te Hua Fang, Tao Hsing Chen, Yu Jen Hsiao, Zheng Han Hong, Cheng Hsin Chuang, Lucio Riccobono. Size effect on mechanical properties of TiO2 capped nanotubes investigated using in situ transmission electron microscopy. Microsystem Technologies, 20.3 (2013): 515-520.
• Tevis D. B. Jacobs, Robert W. Carpick. Nanoscale wear as a stress-assisted chemical reaction. Nature Nanotechnology, 8 (2013): 108-112.
• Youbin Kim, Jinsup Lee, Min Sun Yeom, Jae Won Shin, Hyungjun Kim, Yi Cui, Jeffrey W. Kysar, James Hone, Yousung Jung, Seokwoo Jeon, Seung Min Han. Strengthening effect of single-atomic-layer graphene in metal–graphene nanolayered composites. Nature Communications, 4 (2013).

2012

• A. Kobler, A. Kashiwar, H. Hahn, C. Kübel. Combination of in situ straining and ACOM TEM: A novel method for analysis of plastic deformation of nanocrystalline metals. Ultramicroscopy, 128 (2012): 68-81.
• C. Chisholm, H. Bei, M.B. Lowry, J. Oh, S.A. Syed Asif, O.L. Warren, Z.W. Shan, E.P. George, A.M. Minor. Dislocation starvation and exhaustion hardening in Mo alloy nanofibers. Acta Materialia, 60.5 (2012): 2258-2264.
• C.Q. Chen, Y.T. Pei, J.Th.M. De Hosson. Apparently homogeneous but intrinsically intermittent flow of taper-free metallic glass nanopillars. Scripta Materialia, 67.12 (2012): 947-950.
• Daniel Kiener, Andrew M. Minor, Osman Anderoglu, Yongqiang Wang, Stuart A. Maloy, Peter Hosemann. Application of small-scale testing for investigation of ion-beam-irradiated materials. Journal of Materials Research, 27.21 (2012): 2724-2736.
• Douglas D. Stauffer, Aaron Beaber, Andrew Wagner, Ozan Ugurlu, Julia Nowak, K. Andre Mkhoyan, Steven Girshick, William Gerberich. Strain-hardening in submicron silicon pillars and spheres. Acta Materialia, 60.6-7 (2012): 2471-2478.
• Lin Tian, Yong-Qiang Cheng, Zhi-Wei Shan, Ju Li, Cheng-Cai Wang, Xiao-Dong Han, Jun Sun, Evan Ma. Approaching the ideal elastic limit of metallic glasses. Nature Communications, 3.609 (2012).
• Ling Zhang, Takahito Ohmura, Kaoru Seikido, Kiyomi Nakajima, Toru Hara, Kaneaki Tsuzaki. Direct observation of plastic deformation in iron–3% silicon single crystal by in situ nanoindentation in transmission electron microscopy. Scripta Materialia, 64.9 (2012): 919-922.
• O.V. Kuzmin, Y.T. Pei, C.Q. Chen, J.T.M. De Hosson. Intrinsic and extrinsic size effects in the deformation of metallic glass nanopillars. Acta Materialia, 60.3 (2012): 889-898.
• Qian Yu, Raja K. Mishra, Andrew M. Minor. The Effect of Size on the Deformation Twinning Behavior in Hexagonal Close-Packed Ti and Mg. JOM, 64.10 (2012): 1235-1240.
• S.J. Zheng, I.J. Beyerlein, J. Wang, J.S. Carpenter, W.Z. Han, N.A. Mara. Deformation twinning mechanisms from bimetal interfaces as revealed by in situ straining in the TEM. Acta Materialia, 60.16 (2012): 5858-5866.
• Xiaodan Zhang, Andrew Godfrey, Grethe Winther, Niels Hansen, Xiaoxu Huang. Plastic deformation of submicron-sized crystals studied by in-situ Kikuchi diffraction and dislocation imaging.Materials Characterization, 70 (2012): 21-27.
• Y.B. Wang, D.D. Qu, X.H. Wang, Y. Cao, X.Z. Liao, M. Kawasaki, S.P. Ringer, Z.W. Shan, T.G. Langdon, J. Shen. Introducing a strain-hardening capability to improve the ductility of bulk metallic glasses via severe plastic deformation. Acta Materialia, 60.1 (2012): 253-260.
• Zhiwei Shan. In Situ TEM Investigation of the Mechanical Behavior of Micronanoscaled Metal Pillars. JOM, 64.10 (2012): 1229-1234.

2011 

• A.R. Beaber, J.D. Nowak, O. Ugurlu, W.M. Mook, S.L. Girshick, R. Ballarini, W.W. Gerberich. Smaller is tougher. Philosophical Magazine, 91.7-9 (2011): 1179-1189.
• Chang Qiang Chen, Yu Tao Pei, Oleksii Kuzmin, Zhe Feng Zhang, Evan Ma, Jeff Th. M. De Hosson. Intrinsic size effects in the mechanical response of taper-free nanopillars of metallic glass. Physical Review B, 83.18 (2011).
• D. Kiener, A. M. Minor. Source Truncation and Exhaustion: Insights from Quantitative in situ TEM Tensile Testing Nano Letters, 11.9 (2011): 3816-3820.
• D. Kiener, P. Hosemann, S. A. Maloy, A. M. Minor. In situ nanocompression testing of irradiated copper. Nature Materials, 10 (2011): 608-613.
• Hua Guo, Kai Chen, Y. Oh, Kevin Wang, Catherine Dejoie, S. A. Syed Asif, O. L. Warren, Z. W. Shan, J. Wu, A. M. Minor. Mechanics and Dynamics of the Strain-Induced M1–M2 Structural Phase Transition in Individual VO2 Nanowires. Nano Letters, 11.8 (2011): 3207-3213.
• J. X. Zhang, B. Xiang, Q. He, J. Seidel, R. J. Zeches, P. Yu, S. Y. Yang, C. H. Wang, Y-H. Chu, L. W. Martin, A. M. Minor, R. Ramesh. Large field-induced strains in a lead-free piezoelectric material. Nature Nanotechnology, 6 (2011): 98-102.
• Kelvin Y. Xie, Yanbo Wang, Song Ni, Xiaozhou Liao, Julie M. Cairney, Simon P. Ringer. Insight into the deformation mechanisms of α-Fe at the nanoscale. Scripta Materialia, 65.12 (2011): 1037-1040.
• Ling Huang, Qing-Jie Li, Zhi-Wei Shan, Ju Li, Jun Sun, Evan Ma. A new regime for mechanical annealing and strong sample-size strengthening in body centred cubic molybdenum. Nature Communications, 2.547 (2011).
• Ling Zhang, Takahito Ohmura, Kaoru Sekido, Toru Hara, Kiyomi Nakajima, Kaneaki Tsuzaki. Dislocation character transition and related mechanical response in a body-centered cubic single crystal. Scripta Materialia, 67.4 (2011): 388-391.
• Yanbo Wang, Hannah J. Joyce, Qiang Gao, Xiaozhou Liao, H. Hoe Tan, Jin Zou, Simon P. Ringer, Zhiwei Shan, Chennupati Jagadish. Self-Healing of Fractured GaAs Nanowires. Nano Letters, 11.4 (2011): 1546-1549.
• Yan-Bo Wang, Li-Feng Wang, Hannah J. Joyce, Qiang Gao, Xiao-Zhou Liao, Yiu-Wing Mai, Hoe H. Tan, Jin Zou, Simon P. Ringer, Hua-Jian Gao, Chennupati Jagadish. Super Deformability and Young’s Modulus of GaAs Nanowires. Advanced Materials, 23.11 (2011): 1356-1360.

2007 - 2010 

• Andrew M. Minor, S. A. Syed Asif, Zhiwei Shan, Eric A. Stach, Edward Cyrankowski, Thomas J. Wyrobek, Oden L. Warren. A new view of the onset of plasticity during the nanoindentation of aluminium. Nature Materials, 5 (2006): 697-702.
• C.Q. Chen, Y.T. Pei, J.T.M. De Hosson. Effects of size on the mechanical response of metallic glasses investigated through in situ TEM bending and compression experiments. Acta Materialia, 58.1 (2010): 189-200.
• C.Q. Chen, Y.T. Pei, J.Th.M. De Hosson. Strength of submicrometer diameter pillars of metallic glasses investigated with in situ transmission electron microscopy. Philosophical Magazine Letters, 89.10 (2009).
• Changqiang Chen, Yutao Pei, Jeff De Hosson. In-situ TEM investigation of deformation behavior of metallic glass pillars. MRS Proceedings, 1185 (2009).
• Changqiang Chen, Yutao Pei, Jeff Th M De Hosson. A statistical physics consideration about the strength of small size metallic glass pillars. Journal of Physics: Conference Series, 240.1 (2010).
• D. Kiener, K. Durst, M. Rester, A. M. Minor. Revealing deformation mechanisms with nanoindentation. JOM, 61.3 (2009): 14-23.
• E. A. Withey, J. Ye, A. M. Minor, S. Kuramoto, D. C. Chrzan, J. W. Morris Jr. Nanomechanical Testing of Gum Metal. Experimental Mechanics, 50.1 (2010): 37-45.
• E.A. Withey, A.M. Minor, D.C. Chrzan, J.W. Morris Jr., S. Kuramoto. The deformation of Gum Metal through in situ compression of nanopillars. Acta Materialia, 58.7 (2010): 2652-2665.
• Frédéric Lançon, Jia Ye, Damien Caliste, Tamara Radetic, Andrew M. Minor, Ulrich Dahmen. Superglide at an Internal Incommensurate Boundary. Nano Letters, 10.2 (2010): 695-700.
• J. Ye, R.K. Mishra, A.M. Minor. Relating nanoscale plasticity to bulk ductility in aluminum alloys. Scripta Materialia, 59.9 (2008): 951-954.
• J.D. Nowak, A.R. Beaber, O. Ugurlu, S.L. Girshick, W.W. Gerberich. Small size strength dependence on dislocation nucleation. Scripta Materialia, 62.11 (2010): 819-822.
• Jeff T. M. De Hosson, Wouter A. Soer, Andrew M. Minor, Zhiwei Shan, Eric A. Stach, S. A. Syed Asif, Oden L. Warren. In situ TEM nanoindentation and dislocation-grain boundary interactions: a tribute to David Brandon. Journal of Materials Science, 41.23 (2006): 7704-7719.
• Jeff Th.M. De Hosson. Advances in transmission electron microscopy: In situ straining and in situ compression experiments on metallic glasses. Microscopy Research and Technique, 72.3 (2009): 250-260.
• Jia Ye, Raja K. Mishra, Alan R. Pelton, Andrew M. Minor. Direct observation of the NiTi martensitic phase transformation in nanoscale volumes. Acta Materialia, 58.2 (2010): 490-498.
• Kun Zheng, Chengcai Wang, Yong-Qiang Cheng, Yonghai Yue, Xiaodong Han, Ze Zhang, Zhiwei Shan, Scott X Mao, Miaomiao Ye, Yadong Yin, Evan Ma. Electron-beam-assisted superplastic shaping of nanoscale amorphous silica. Nature Communications, 1.24 (2010).
• Laurence D. Marks, Oden L. Warren, Andrew M. Minor, Arno P. Merkle. Tribology in Full View. MRS Bulletin, 33.12 (2008): 1168-1173.
• M.B. Lowry, D. Kiener, M.M. LeBlanc, C. Chisholm, J.N. Florando, J.W. Morris Jr., A.M. Minor. Achieving the ideal strength in annealed molybdenum nanopillars. Acta Materialia, 58.15 (2010): 5160-5167.
• Michael Tong, Vinay Sriram, Andrew Minor, Jenn-Ming Yang. In Situ and Ex Situ Nanomechanical Analysis of Reactive Nanolayer Solder Joints. Advanced Engineering Materials, 11.8 (2009): 645-649.
• Oden L. Warren, Zhiwei Shan, S.A. Syed Asif, Eric A. Stach, J.W. Morris Jr., Andrew M. Minor. In situ nanoindentation in the TEM. Materials Today, 10.4 (2007): 59-60.
• Qian Yu, Zhi-Wei Shan, Ju Li, Xiaoxu Huang, Lin Xiao, Jun Sun, Evan Ma. Strong crystal size effect on deformation twinning. Nature, 463 (2010): 335-338.
• Vinay Sriram, Jenn-Ming Yang, Jia Ye, Andrew M. Minor. Determining the stress required for deformation twinning in nanocrystalline and ultrafine-grained copper. JOM, 60.9 (2008): 66-70.
• Vinay Sriram, Jenn-Ming Yang, Jia Ye, Andrew M. Minor. In-situ metrology and testing of nanotwinned copper pillars for potential air gap applications. Microelectronic Engineering, 87.11 (2010): 2046-2049.
• W. A. Soer, J. Th. M. De Hosson, A. M. Minor, Z. Shan, S. A. Syed Asif, O. L. Warren. Incipient plasticity in metallic thin films. Applied Physics Letters, 90 (2007).
• Ye Sun, Jia Ye, Andrew M. Minor, T. John Balk. In situ indentation of nanoporous gold thin films in the transmission electron microscope. Microscopy Research and Technique, 72.3 (2009): 232-241.
• Ye Sun, Jia Ye, Zhiwei Shan, Andrew M. Minor, T. John Balk. The mechanical behavior of nanoporous gold thin films. JOM, 59.9 (2007): 54-58.
• Z. W. Shan, G. Adesso, A. Cabot, M. P. Sherburne, S. A. Syed Asif, O. L. Warren, D. C. Chrzan, A. M. Minor, A. P. Alivisatos. Ultrahigh stress and strain in hierarchically structured hollow nanoparticles. Nature Materials, 7 (2008): 947-952.
• Z. W. Shan, J. Li, Y. Q. Cheng, A. M. Minor, S. A. Syed Asif, O. L. Warren, E. Ma. Plastic flow and failure resistance of metallic glass: Insight from in situ compression of nanopillars. Physical Review B, 77 (2008).
• Z. W. Shan, Raja K. Mishra, S. A. Syed Asif, Oden L. Warren, Andrew M. Minor. Mechanical annealing and source-limited deformation in submicrometre-diameter Ni crystals. Nature Materials, 7 (2007): 115-119.
• ZW Shan, J Oh, A Minor, SAS Asif, OL Warren. Quantitative TEM Tensile Testing on 1D Nano-structural Materials. Microscopy and Microanalysis, 15.S2 (2009): 1188-1189.